Tremec 5 speed mounted to a rebuilt 454 set up

[dlv4540]

I have picked up a 1969 pace car that has a tremec 5 speed conversion in it along with a 454 motor that has the casting number of 3963512 dated I-6-9 and has the square port 3964291 heads on it. He has the aluminum low profile intake but has a aftermarket aluminum intake and Holley carburetor on it. It has the headman super comp headers and runs off of pump gas. I do not know what internals are in it but can say it runs cool and he drove it out to my house which was over 300 miles and we drove it around some more before getting him his money and sending him on his way. I believe the motor is a 2 bolt not a 4 buy the size of the holes down by the oil filter but is just a guess. The drivetrain is fantastic to drive and if I was not wanted to put it back to original specs I would keep it in there. The tremec 5 speed is a couple of years old and he drove the car a couple thousand miles each year since he owned it.
What would be the value on this set up and it is in the car so I could take someone for a drive in it or let them here it run. I figure this is a great cruiser for a pro-touring set up so thought I would post it here. I can be reached at 330-770-2517 Dennis Vugrinovich and I live in Warren Ohio about an hour east of Cleveland. I can also ship it if somebody would be interested in it. I know the front pad was decked so thier is no numbers on the front pad which would have made it easier to figure out.

[SShep71]

There is actually an acid that you can put on the front pad to "reveal" the numbers. Depending on how much it was decked of course