GMR FABRICATED Steel C5/6 Uprights

[BADDRIDE II]

Up for sale is my personal set of Fabricated C5/6 Uprights (steering knuckles). My project has gone another direction and these beautiful pieces will not be needed :crying:

These are for the serious track enthusiast, NO deflection here! And are as light as the OEM's! These would be over $1700.00 +tax to duplicate,,,,, but you can have my set for $1200 obo!
***These will accept your current steering arm (Art Morrison, DSE, etc.)

81958

[raustinss]

Will these fit a 70 chevelle ?

[BADDRIDE II]

Will these fit a 70 chevelle ?

If you are currently running C5/6 type suspension, then yes. If you have stock suspension, no. Hope this makes sense. Thanks.

[raustinss]

No suspension right now but I know the planned Z06 brakes or purchased Z51 brakes will work and suspension was going to be SPC tubular uppers and lowers

[BADDRIDE II]

No suspension right now but I know the planned Z06 brakes or purchased Z51 brakes will work and suspension was going to be SPC tubular uppers and lowers


These will not work with this type suspension. Sorry. CPP makes a Upright for your car that accepts the C5/6 Hub and is very strong.... and much less money.

[raustinss]

Ok thanks for the info, I'll have to check them out. Good luck with the sale
Ryan Austin