New 67-69 Camaro/Firebird Door Panels from MCI

[MCI]

MCI now has new door panels for the 1st Gen Camaro/Firebird available.


81890


81892


Mike
MCI
260-602-7651
[email protected]

[Larry Callahan]

Very nice!!!!!

[spacepirate]

I like these. They look custom but not too extreme!

[T_Raven]

Those look good. Your title says 67-69. Are you making some that fit 67s or have you made those to fit over the upper part of a 67 door? Or are they just for 68-69?

[daredvl22]

Very cool, I have the same question as above, regarding the '67 fitment. Also:

- Price?
- Availability?
- Door lever location, what is used?
- Is the arm rest portion billet?

Thanks,

[MCI]

The door panels are slightly deeper than the original so it will fit over the top of the door. Our hand layup is very consistent and clean, so we end up with a 1/8 part thickness.
We used the original 68 door latch lever in the stock location. The lever is in the arm rest, it is
similar to the 67 set up where the lever is concealed in the arm rest. The panel just mounts over the lever.
The panel I have on the door in the pictures is set up for power windows and
a switch panel on the part of the arm rest that angles up toward the dash. We have another panel that does not have the part of the arm rest that angles up toward the dash, this allows you to use the original window crank.
I will PM anyone that needs a quote on these. We also offer vinyl covering and hydro dip for the
secondary panels. Our display models will be black vinyl with walnut wood grain hydro dip on the secondary panels and aluminum accents.

[MCI]

Very cool, I have the same question as above, regarding the '67 fitment. Also:

- Price?
- Availability?
- Door lever location, what is used?
- Is the arm rest portion billet?

Thanks,

- I will have them up on our website in a cople of days with the price.
- We are ready for production, as it stands right now we are about two weeks out with orders.
- We used the stock 67-68 door levers, they are behind the arm rest, similar to a 67.
- There is a billet strip under the padded part of the arm rest.

[tsquared]

When will the web site be updated with pics and pricing?

[Boostable]

These look really good, please PM me with some pricing for my 69 Conv.

Thanks,

[Mark68]

Could you please PM me a price for a set of these for my '68 without power windows and a red dip on the secondary panels.

Thanks, Mark

[MCI]

When will the web site be updated with pics and pricing?

We are waiting on some new pictures and we are working on some install pictures for the website. If you need to place an order call Mike at 260-602-7651

[G_skillz81]

Can I get a pm with price? 68 Camaro with manual windows

[Todd in Vancouver]

Those look great and I will ad to my wish list when I get the '67 ready for interior.

Nice job putting these together!

[MCI]

This is our new 67 - 68 interior kit. The kit includes a center console, the door panel kit, a dash pad and vent bezels

87871

Mike
MCI
260-602-7651
[email protected]
www.modernclassicsinteriors.com

[daredvl22]

Looks good Mike.

I know there are a few different options one can select (IE) glove box, cup holders, etc. What is an average ball park price for the kit pictured above?

[MCI]

Looks good Mike.

I know there are a few different options one can select (IE) glove box, cup holders, etc. What is an average ball park price for the kit pictured above?


PM sent

[timopajala]

Looks good Mike.

I know there are a few different options one can select (IE) glove box, cup holders, etc. What is an average ball park price for the kit pictured above?


So is the price a secret or can you post some price info to me also?

[perry mitchell]

So is the price a secret or can you post some price info to me also?

I agree. What's the big secret. You don't even have prices on your website. You have been advertizing them on this forum since September. Wouldn't it be easier to tell everyone all at the same time rather than each of us individually?

[MCI]

I agree. What's the big secret. You don't even have prices on your website. You have been advertizing them on this forum since September. Wouldn't it be easier to tell everyone all at the same time rather than each of us individually?

No secret, any thing that is posted in these forums is in the web search engine for good, therefore I would like to be sure of my price from a production point of view before I post it. My goal is to offer you guys great parts at a reasonable price, so until I am confident in my price structure, I would like to keep the pricing thru email or PMs.

[wadem]

can you pm me a price for the door panels,thanks

[Ben@SpeedTech]

Very nice!!

[rohrt]

subscribing

[DButler]

Pm me price for the interior kit for 69 camaro

[Oldspice]

I am also interested in door and quarter panels for a 69 Camaro. I'm almost ready to start the interior of the car.

[chad3d]

PM me for '69 Camaro. Thanks

[MCI]

PM me for '69 Camaro. Thanks

PM sent

[Jcr]

Pm me price for door and quarter panels only for 67 Camaro

[MCI]

Pm me price for door and quarter panels only for 67 Camaro

You can find the pricing for our door panel kits on our website now.
www.modernclassicsinteriors.com

[jamielehman82]

how much an do u ups or fed ex

[MCI]

We use Fedex. You can find most of our products on our website www.modernclassicsinteriors.com
Be sure to check out our 4th of July sale. Starting Monday, we will mark everything down 10%.
Sale ends Friday.

[slicknick]

I would like the price for the set up pictured for a 67 camaro

[skinnyboy67]

Any install pics for a 67?
Interested in a set .... But Leary on how it will look hooking over the top.
Any side profile pics would be appreciated

[davidk68]

Gentlemen beware - I have been waiting a very long time for a console from them and I am doubting now if I ever will recieve it! Check out the Feedback section. I don't think he has posted since August

David

[garickman]

It seems you're not the only one. Looks like there are some other people looking for this guy also.

http://www.lateral-g.net/forums/showthread.php4?t=48216&highlight=mci

[NYTRANSAM]

Has anyone had any recent luck with MCI? I like his products but don't want to be scammed. Does anyone else make consoles like them?

[davidk68]

Well guys, I have good news. I recieved my console on Saturday. The quality and finish are very, very nice - it is ready for sanding and paint. I had them move back the cup holders 3 inches and shorten the glovebox lid so I would have room for the T56 Viper tranny shifter. I knew it would take longer because of the customizing and I told Mike that up front but I think the length of the wait was a little excessive. Qverall though I am very satisfied and pleased with the console. BTW, someone on lateral-g recieved a console in December.

David

[Motown 454]

At least he is filling the orders he has and not taking the money and running. I hope the best for him he looks like he has some nice stuff.