PDA

View Full Version : Anybody have this part?



Happyfunballs
08-29-2005, 05:44 AM
The T56 service manual calls it a housing, clutch actuator adapter. I believe the GM part number is 12523315(they call it a bracket). Nevertheless, its the bracket that goes between the bellhousing and the clutch actuator(ya know the part that pushes against the clutch fork?), I recieved every part from the salvage yard but this one. My local GM dealer said they could get me one, but I would need a VIN off of the Camaro it came from. I informed them that I didn't think a 67 VIN would help....they agreed.

BrianP
08-29-2005, 08:59 AM
Try http://www.gmpartsdirect.com
$23.02

MarkM66
08-29-2005, 12:55 PM
If it's the part I'm thinking of, I had to buy one too. It's basically an aluminum spacer right?

Try another dealer, I got mine at Cox and Cohoe in Wentzville. Took a few days to get. I had to get the studs that attach it too.

Happyfunballs
08-30-2005, 04:28 AM
I went to Fusz and Elco, both did a dealer search and both said nobody in 50 miles has it. :bsjerk:

It is that aluminium spacer...I even have the studs. I'm gonna try that website today. Thanks Mark.

EFI69Cam
08-31-2005, 08:03 AM
The T56 service manual calls it a housing, clutch actuator adapter. I believe the GM part number is 12523315(they call it a bracket). Nevertheless, its the bracket that goes between the bellhousing and the clutch actuator(ya know the part that pushes against the clutch fork?), I recieved every part from the salvage yard but this one. My local GM dealer said they could get me one, but I would need a VIN off of the Camaro it came from. I informed them that I didn't think a 67 VIN would help....they agreed.

Call Ken Casey at Burt Chevy 303-761-5161

Happyfunballs
08-31-2005, 10:12 AM
Thanks. I've ordered it via GM Parts direct, hopefully I'll get it. If not I'll give your guy a call.

ertoys
12-22-2005, 04:06 PM
Thanks. I've ordered it via GM Parts direct, hopefully I'll get it. If not I'll give your guy a call.
Happyfunballs,
Nice 67 ya got there!
I do not know of many people in the area with hot rods.

Blaster11
12-22-2005, 05:17 PM
I am in need of that same part would you post the part #?

Thanks,

Bruce

derekf
12-22-2005, 06:38 PM
12523315 (was in the original post)

josh79camaro
05-12-2009, 06:44 PM
The bracket is called a clutch cylinder actuator bracket, i can make as many as you need. parts,time,and material cost $129.95 plus $10.00 standard shipping and delivery. you can contact me at josh79camaro@hotmail.com or phone (317)409-4399

FirstGenZq8
05-13-2009, 07:02 PM
do you make dust sheilds?

josh79camaro
05-14-2009, 12:04 PM
are you talking about inner fenders