Anybody have this part?

[Happyfunballs]

The T56 service manual calls it a housing, clutch actuator adapter. I believe the GM part number is 12523315(they call it a bracket). Nevertheless, its the bracket that goes between the bellhousing and the clutch actuator(ya know the part that pushes against the clutch fork?), I recieved every part from the salvage yard but this one. My local GM dealer said they could get me one, but I would need a VIN off of the Camaro it came from. I informed them that I didn't think a 67 VIN would help....they agreed.

[BrianP]

Try http://www.gmpartsdirect.com
$23.02

[MarkM66]

If it's the part I'm thinking of, I had to buy one too. It's basically an aluminum spacer right?

Try another dealer, I got mine at Cox and Cohoe in Wentzville. Took a few days to get. I had to get the studs that attach it too.

[Happyfunballs]

I went to Fusz and Elco, both did a dealer search and both said nobody in 50 miles has it. :bsjerk:

It is that aluminium spacer...I even have the studs. I'm gonna try that website today. Thanks Mark.

[EFI69Cam]

The T56 service manual calls it a housing, clutch actuator adapter. I believe the GM part number is 12523315(they call it a bracket). Nevertheless, its the bracket that goes between the bellhousing and the clutch actuator(ya know the part that pushes against the clutch fork?), I recieved every part from the salvage yard but this one. My local GM dealer said they could get me one, but I would need a VIN off of the Camaro it came from. I informed them that I didn't think a 67 VIN would help....they agreed.

Call Ken Casey at Burt Chevy 303-761-5161

[Happyfunballs]

Thanks. I've ordered it via GM Parts direct, hopefully I'll get it. If not I'll give your guy a call.

[ertoys]

Thanks. I've ordered it via GM Parts direct, hopefully I'll get it. If not I'll give your guy a call.
Happyfunballs,
Nice 67 ya got there!
I do not know of many people in the area with hot rods.

[Blaster11]

I am in need of that same part would you post the part #?

Thanks,

Bruce

[derekf]

12523315 (was in the original post)

[josh79camaro]

The bracket is called a clutch cylinder actuator bracket, i can make as many as you need. parts,time,and material cost $129.95 plus $10.00 standard shipping and delivery. you can contact me at [email protected] or phone (317)409-4399

[FirstGenZq8]

do you make dust sheilds?

[josh79camaro]

are you talking about inner fenders