66 Nova

[scotzilla]

This is one of our complete builds right now. The plan is 550 hp Sbc, 5 speed, 9 Inch triangulated 4 link, martz mustang 2 front clip, body and paint, stockish interior with some updates, Mini tub, sub frame connectors, raised tunnel, shaved firewall, stainless fuel tank, plumbing and exhaust. Fesler hood and trunk hinges and tail lights, Wilwood brakes.


heres what showed up
https://static1.pt-content.com/images/pt/2013/08/3073300D5A044B03AA4D0279E10672A617790000-1.jpg

https://static1.pt-content.com/images/pt/2013/08/B7AAD1067CE4426EBA42685D8F634E3F85650000-1.jpg
https://static1.pt-content.com/images/pt/2013/08/D67519BEEF104A138032D70684E8C47F85650000-1.jpg

https://static1.pt-content.com/images/pt/2013/08/4D089483693A4A30845AA8C9D2CCCA9A14373000-1.jpg

https://static1.pt-content.com/images/pt/2013/08/D440CCCFBA0249A39EF3697788CCB8E885650000-1.jpg

https://static1.pt-content.com/images/pt/2013/08/362673D48DD44E57B09EAB61CA7CC68A85650000-1.jpg


the wheels he ordered before we got the car that he is already planning to change them up to fill the rear wheel well



https://static1.pt-content.com/images/pt/2013/08/46019F3B1027452AA5ED07EAC658C38912520000-1.jpg

https://static1.pt-content.com/images/pt/2013/08/C75E43D27E404E3FAF8988C87351F9DF12520000-1.jpg

https://static1.pt-content.com/images/pt/2013/08/336B7B78BB754D648DFAD599E369861612520000-1.jpg

https://static1.pt-content.com/images/pt/2013/08/7985FA14A79941A68674714B54E6775B12520000-1.jpg

old accident damage that wasnt fixed right. then someone hung a new quarter on top of so the trunk wouldnt fit.

https://static1.pt-content.com/images/pt/2013/08/DFECBD4435D747399D74BACE0BF4291E12520000-1.jpg

https://static1.pt-content.com/images/pt/2013/08/A1CACA52904D42E2961EEB313C0D4D5712520000-1.jpg

https://static1.pt-content.com/images/pt/2013/08/6141AF0974604A0CA137837347CD6AEF19715000-1.jpg

everything squared up fitting like its supposed too

https://static1.pt-content.com/images/pt/2013/08/92D99A7F624F44B5B79FCFEDBA3B8F2519715000-1.jpg


https://static1.pt-content.com/images/pt/2013/08/2B26A97E6AB5409A9307C4510FE5B62019715000-1.jpg

if you ever build one of these- dont settle for anything but factory sheet metal. We couldnt find any for two months and he opted to press forward and section oer panels. Over 100 hours later we have nice panel alignment

https://static1.pt-content.com/images/pt/2013/08/5CA7B74BDECD4B92988238C82DEA299B68140000-1.jpg
https://static1.pt-content.com/images/pt/2013/08/CCE3965540CB4C148D935F7D92E65C7068140000-1.jpg

https://static1.pt-content.com/images/pt/2013/08/30CEC8D640F44DA6B13818AE12DFED5568140000-1.jpg


https://static1.pt-content.com/images/pt/2013/08/51C5EFE6E7034B16B942DD085842BB1336810000-1.jpg