steinepstein
07-16-2013, 02:09 PM
Black label ZF 6 (http://viglink.pgpartner.com/rd.php?r=402&m=915273754&q=n&rdgt=1373899016&it=1374071816&et=1374503816&priceret=57.60&pg=~~3&k=b18dac4f88f688d7713dcbf040877ef0&source=feed&url=http%3A%2F%2Fwww%2Eamazon%2Ecom%2Fdp%2FB005TIR 4ZW%2Fref%3Dasc%5Fdf%5FB005TIR4ZW2552778%3Fsmid%3D ATVPDKIKX0DER%26tag%3Dpg%2D903%2D01%2D20%26linkCod e%3Dasn%26creative%3D395097%26creativeASIN%3DB005T IR4ZW&st=feed&mt=~~~~~~~~n~~~) speed
QT bellhousing, new
McLeod hydraulic throwout bearing, new
2010 Camaro LS3 clutch, 1500 miles.
Fresh round of Amsoil synchromesh
Also have magnesium ZF bellhousing
$1900 obo plus the shipping
Located in Chicago.
I'll consider trades for other manual transmissions...T56...If you want the whole setup..I'll let that go too..LY6 with custom harness (http://rover.ebay.com/rover/1/711-53200-19255-0/1?toolid=10029&campid=CAMPAIGNID&customid=CUSTOMID&catId=6000&type=2&ext=130918929424&item=130918929424).
I have this trans currently bolted up to a LS motor and have checked the clutch PP to throwout bearing distance, 5.5mm, all looks good..... I am still finishing the project but the car is a 62 Nova and the trans sits too low, I don't think it is going to work.
The LS conversion parts alone are over half the cost of this setup.
Also, I checked end play, spline meshing, and and shifting are all very nice on this trans.....but I cannot confirm mileage..
Thanks,
Jon
QT bellhousing, new
McLeod hydraulic throwout bearing, new
2010 Camaro LS3 clutch, 1500 miles.
Fresh round of Amsoil synchromesh
Also have magnesium ZF bellhousing
$1900 obo plus the shipping
Located in Chicago.
I'll consider trades for other manual transmissions...T56...If you want the whole setup..I'll let that go too..LY6 with custom harness (http://rover.ebay.com/rover/1/711-53200-19255-0/1?toolid=10029&campid=CAMPAIGNID&customid=CUSTOMID&catId=6000&type=2&ext=130918929424&item=130918929424).
I have this trans currently bolted up to a LS motor and have checked the clutch PP to throwout bearing distance, 5.5mm, all looks good..... I am still finishing the project but the car is a 62 Nova and the trans sits too low, I don't think it is going to work.
The LS conversion parts alone are over half the cost of this setup.
Also, I checked end play, spline meshing, and and shifting are all very nice on this trans.....but I cannot confirm mileage..
Thanks,
Jon