View Full Version : Suspension
- 19x9's vs steering arms on stock subframe
- Ridetech new R Joints?
- I got my new subframe for my Camaro,from Indy speed and engineering !
- Benefits of boxed frame?
- Is a power steering cooler necessary for my application
- Ridetech StrongArm Question for First-gen Mustangs
- Steering box recommendation....?
- 69 Camaro Convertible - Pro-Touring Suspension Advice
- Ridetech Coul over instal question
- Install directions for a Lateral Dynamics Suspension in 1st Gen Camaro?
- 1969 Camaro Subframe Connectors
- 68 Camaro steering problems
- Adjusting Camber with SPC Uppers
- Ridetech 4 link for 1st gen F-body - new vs old style & R-joints
- Rear sway bar tube
- 69 camaro 4 link install squaring things up?
- 67 Camaro Spring Rate for front Ridetech Coilover
- Chevelle control arms
- Coil spring install tip
- How to reduce axle hop on accel.
- RideTech Street Grip in 1st Gen. F-body.
- Mopars and 4 links
- Are Spring Pads A Must?
- Rear sway bar only with big/little tires?
- NEW Ridetech 2nd Gen 4-Link Installation VIDEO
- Customizing Your Coilovers
- 1968 Firebird Set Up Question
- 68 Firebird with Butler Performance engine
- 2nd gen F-body Herb Adams mod - it works
- 1969 camaro aftermarket subframe, allowing 315 tire, stock fender
- Steering box removal HELP. 1970 Nova
- Roadster shop Gen 3 Spec Chassis
- 70 Nova Rear Shock Relocation Possible?
- Best suspension software?
- Need Shock Input for 68-72 A-Body
- Taking C10s to the ExtReme
- Shock Mounting
- 68 Chevelle QA1 Front Suspension
- 1964 a body alignment specs
- Lasers for Alignment?
- Pole Position Racing and Rod Products
- QA1 Lower Control Arm
- Help with rear axle width?
- Introducing Lateral Dynamics Competitor Modular Spindles
- ATS Spindles- A great product gets even better!
- 69 Nova performance cruiser front suspension rebuild
- Subframe connectors 68 camaro
- 67 A Body Rear UMI Coilovers with QP 9”
- RideTech Composite Leaf Springs
- need help on speedtech front subframe rack
- Hotchkis handlebars too much camber
- Procedure For Shimming Control Arms To Add Camber?
- 1980 T/A stock 15' wheels. Subframe options?
- Nova Suspension Advice
- Autocross action video of DSE suspension
- Input needed on a good A-Body steering box
- Power steering question
- Question on Jeep steering box on '68 Camaro.
- Newly designed spc performance lca
- steering issue!what could be the reason??
- Front upper control arms
- 100 bucks & a couple hours = happy '78 T/A
- Chicane bracket,spc lca,and ridetech coilovers...help.
- Best bang for buck 56 Chevy pickup suspension
- floating feeling
- Is there an optimal tire height in relation to lowering the car? (A-Body)
- Question about AME chassis rear coilover modification
- QA1 shock broke on first day back!
- 3 Link upper Mount Material
- Looking for....
- Total control Coil over
- Rear wheel hop under heavy braking, HELP!
- cyclic / pulsing pibration at 55 MPH and up
- G-Body Solid Body Bushings
- Front Suspension questions
- BMR Torque Arm Rear and Speedtech Front
- rear end swap now my ride is bouncy
- 67 Chevelle Budget Suspension Guidance
- 69 A body-W/SC&C- More caster, less static camber question....
- Front Suspension Travel (What did I do wrong?)
- Leaf/link questions
- Coil over quest...
- Ford steering box help
- Springs for 1970 Pontiac Lemans Convertible
- C4 suspension
- Martz Chassis subframe, 4-link and components praise
- sway bar question
- Poor Hotchkis Sub Connector Fit-up 70 Nova
- Front leaf spring mount strenghtening
- Rear control arm bushings
- First gen Camaro front subframe / rear suspension Vendors..opinions, recommendations
- Looking for recommendations on frame connectors and body bushings
- UMI Green Machine at Northeast Musclecar Challenge
- Frame under axle - Thought?
- DSE engine mount kit and steering u-joint
- Budget Subframe
- anyone have issues with the Turn One steering box?
- Sec Gen Spring Rate DSE set-up
- 4-Link: Bar locations?
- 1969 Nova with SPC control arms alignment specs for steet use please
- Infiniti Q45 IRS
- Ball joint castle nut
- Mini tub/pro-touring help for 93 foxbody...
- Rear roll center question
- Screwed up with my 12 bolt order
- UMI Corner Max Install - Facebook Live video recap
- Strut/cowl braces that work with Ridetech Coilovers
- Ridetech Control Arm Question
- Torque Arm geometry in custom application: multiple questions
- EBay Delphi score!
- Tuning suspension for a noob (rear roll axis & antisquat)
- Electric power steering pump for auto-x
- Track Width Front & Rear, Should they be the same?
- Alignment question, KPI vs Caster...
- Ridetech Strong Arm Stock Seay Bar issue
- rearend suspension question
- Chassis and supension
- MacPhearson Strut and chassis setup
- 61 tempest front end
- Spindle options with Corvette wheel bearing to work with my RideTech suspension??????
- front mush suspense help
- IRS VS Truck Arms
- Looking to add rack and pinion to a 1972 cutlass with an LS
- Bump Steer Kit?
- Billet or solid tie rod sleeves
- Upper control arms & balljoint angles for tall spindles
- QA1 A arms
- Manual steering and EPAS
- 69 GM A Body Linkage, Kits?
- Experienced Opinions on CPP 2nd Gen Spindles??
- 69 Camaro DSE sub engine location relative to stock
- 1967 Firebird drum hub, ARP stud issues
- 69 Camaro frame measurements
- G Body Suspension Needed
- 72 Nova body and frame issues
- 69 chevelle rear coilover bracket options
- BMR Front Suspension versus Speedtech Pro-Touring
- UMI Black Friday Sale Starts now! Caution: New Products Inside
- Power Steering Choice, need advice
- Chevelle coilover Q
- Rear axle hop on heavy throttle accel
- Shocks/Coilovers
- Power Steering Box
- Does anyone out there have a prodigy bar for a first gen camaro? I have questions...
- New UMI tech video: Converging 4-link adjustment (pinion angle and lateral location)
- New project - '81 Z28 - leaf spring recommedations
- Which Power Steering Box?
- Suspension Travel....How much is Enough
- Press in ball joint replacement on GW UCAs
- Ridetech Muscle Bar
- Toyota FRS Electric Power Steering in an A Body
- Ridetech Tru Turn clearance issuee
- leaf spring vs 4link suspension F-body
- 67 mustang front suspension
- 72 Chevelle suspension
- Cool New Products from UMI for the 1970-1981 Camaro and Firebird
- feedback on Speedtech / Ridetech full suspension for factory frame - 2nd gen Camaro
- UMI Year End Sale Starts Now! Discounts and Free Shipping
- Rear diff brackets?
- Subframe level with rocker?
- No Limit Sniper IFS Subframe for 69 Camaro/Firebird
- Which coilovers for 68 Camaro?
- Anybody running RideTech TruTurn on 1st gen Firebird w/ Pontiac engine?
- Hotchkis Fox shocks
- 22" Center-to-Center Front Steer Rack and Pinion?
- '73 Trans Am LS3 Swap - advice on new front subframes
- 4 link geometry review (calcs done)
- shocks?
- Tri 4 Bar vs Quadra Link
- Suspension Setup to Lower Car
- Who's running 600 Series steering boxes & what ratio?
- 68 Camaro Which front sway bar????
- C5 chassis with 2nd Gen camaro F body.
- 69 Camaro 2" Drop Spindle Dilemma
- 71 camaro on Ridetech (12" wheel question)
- Need DSE hardline Torque!! Help
- Coilover Compatability with DSE Control Arms
- Gbody frame bracing and notching
- Torque Arm versus 3-link characteristics
- Shimming front sway bar on 1st gen camaro?
- Do i need resr Control Arm Relocation Brackets if lowered a 64-67 A-Body ...???
- Suspension and Brake Package
- Aftermarket subframes using C5/C6 suspension
- Pro-touring.com newbie!
- 9" Ford rear ends
- Camber Gain: How Much Is Too Much?
- What size tubing for truck arms on 70 c10?
- Autocross Falcon Suspension Tuning Advice
- three link upper link question
- Anyone use REAR COILOVER SYSTEM in A-BOdy from Speedtech Performance USA
- Motor/trans angle?
- Ridetech Install- Coilover
- Early GM A-Body right height w/ Global West suspension. Surely this isn't right?
- 69 camaro idler and pitman arm help
- True turn ride height question
- Theory craft / Rear suspension geometry custom IRS adaptation
- Need help finding lower a arm bolts
- no power steering unless rev engine
- DSE mini tubs and leaf springs
- Ridetech Street Grip kit review.
- Power Steering Rack for 3rd gen Nova/1st Gen Camaro
- AMC Rebel Machine build/suspension
- Adjustable Coilover for daily driver
- Shock Relocation for Leaf Springs and Mini tub - 1969 Camaro
- 1st gen Fbody maximum rear track width?
- Going BLACK - UMI Performance Revises Sway Bar Brackets
- Proforged TALL upper ball joints.... GAP???
- speedtech LCA bolt question - Camaro with factory subframe
- Has anyone actually combined tall ball joints with the Guldstrand mod?
- Aftermarket rear with high upper trailing arm mount point
- BMR torque arm kit for 8.5 inch 10 bolt
- GM B body spindle help with tie rod application... Please help with input!
- Steering box
- Caster angle question
- Leaf Spring Rate Question
- 73 ventura and 69 camaro front subframe the same?
- 69 charger build
- Solid Setup?
- AME IRS Install -Need Tips!!
- Aftermarket Frame/Chassis For 67 Camaro Firebird Selection of Parts
- KPI for 02 wrx front spindle
- Tire clearance and wheel travel
- Ridetech shock Dyno
- Selection of the steering box
- Choosing a torque arm setup.
- Need new Ball joints for Chris Alstons TCP Ford Upper control arms
- Detroit Speed Rack Fittings
- Where can I learn more about rear axles, gears and housings?
- 68 Firebird rear suspension help... Recs needed, bang for buck corner carver
- Getting steering column & electric power steering before buying a subframe
- 70 Chevelle shorter rear shocks
- UMI Launches The Power Tour Package Suspension System!
- 69 el Camino Front Sway Bar..
- UMI Releases 2nd-Gen F-Body Stage 2 and 3 Handling Kits!
- Bump steer geometry question
- Bellcrank for pushrod suspension or shocks, off the shelf?
- Ridetech Contacts
- Rear sway bar needed for 2nd gen f-body
- Detroit Speed, A body, Sway Bars..
- 2nd gen F-body front alignment settings
- Bump stops 67 Camaro Alston 4 link and Alston shocks
- Ridetech Air Ride questions
- 68 camaro 327 with tru-turn what headers
- Difficulty with lower arm bar Ridetech 67’ camaro
- Struts and Shocks Third Gen Camaro
- what aftermarket subframe will take my current 1st gen components ?
- Vette Brakes & Products
- SKF X-tracker wheel bearings
- HELP!!! Power steering issues... continued
- Retrofit of wheel speed sensor into spindles
Powered by vBulletin®