View Full Version : Suspension
- 1LE Rear Control Arm Bushings - G-Body Guys Come Out
- actual ride height of DSE 2" or 3" rear leafs on 69 Camaro
- 66 Chevelle
- Cutting front coils...1 coil==2"???
- suspension freaks
- Anyone know what DSE leaf spring rates are?
- If you have a 67-68 camaro with AFX spindles, please help!
- front sub frame who's and why's
- What kind of "flex" do subframe connectors prevent?
- Will Fatman G force spindles work?
- Iroc/GTA "Z" box on 1st gen Camaro
- chris alstons Gbar, heidts 4 link, DSE Quadra link
- 4 Link with tailpipes?
- PS problem...
- Mixing Global West UCAs with DSE LCAs
- Cal Trac or Slide a link
- air bar any body run one?
- More A-body suspension questions
- G-machine
- Tall lower ball joints ???
- rear sway bar
- Which lowering springs?
- Front sub-frame to Firewall bracing
- Suspension Help
- Any other suspension shops other then DSE, global west?(need susp. help bad)
- Knurled cross-shaft a-arm bolt
- Why run a front sway bar?
- Airride on a 1st gen Camaro YES or NO
- New guy with first question. Tubular control arms?
- Pagging Craig Morrison - New AME First Gen Sub
- Ready To ship!!!!
- Another Suspension Question
- GTO frame Help
- Performance Trends Users
- Hotchkis front spring question
- wide-track Camaro suspension ?????
- Hotchkis 2" lowered Springs hitting...
- Suspension design and theory
- Paging silver69camaro
- Slidealinks
- hotchkis swaybars
- Just received my parts from SC & C!
- Suspension balance - coils with air - do they work together?
- Roundy round spring questions
- What front end kit??????
- Sources for tubing
- suspension geometry relocation
- Power to manual steering box second gen
- Rear Leaf Spring Perch Question
- Chevelle Spindle Question
- Manual steering box help
- Camaro and Mustang full chassis
- Looking for rear mini tubs for g body
- Opinions On Set Up Pls
- Steering box and pump recommendations?
- Autofab Racecars - Street Rod Ladder Bars
- Lowering suspension question...
- Custom Rag joint
- Watts Link
- IRS suspension.
- to hiem or not to hiem????? what would u use???
- Alignment/box questions
- Power Steering question...
- Need AFX spindle and steering arm help
- Who is correct
- A-BODY frame boxing is a waste of time.
- Pro shock
- paging silver69camaro
- What Shock should i Use...?
- Global West
- difference in 64 and 65 GTO frames
- Leaf Spring (Yes, you read right) Question...
- how low ?
- leaf spring rear suspension design books
- Chevy II Leaf springs help
- Air ride on a 2nd gen
- Hotchkis A-arms
- Anyone use 'GM Spindle Length Spacer'?
- sitting high
- subframe bolts
- "El.plating"
- Suspension Dimensions
- Help on Lowering my Torino
- ALIGNMENT SPECS FOR 2nd gen
- Could I drag race with ATS spindles?
- Go ahead... tell me how dumb I am...
- Anyone see the arcticle on rack conversions in HOT ROD?
- DSE kit mini-tub kit question
- C4 Irs
- Got new Moser Rearend Today
- Lowering question - 95 Park Avenue
- ATS Spindle tie rod problems??
- A body - G body suspension compatability
- Any install tips for Stage 2 kit from SC&C?
- Tubular A arms that lower?
- Speedway Upper control arms
- Removable steering rod on GM A-body
- shorten driveshaft
- How did you mount them? Air-Ride Dilema
- ATs
- power steering box what one?
- shocks
- Animated performance trends.
- How do I fix this type of steering slop?
- different steering pump
- Clean Sheet Front Suspension For "G" Body
- Decifering PT reports
- DSE Speed Kit 1-3
- AGR Steering box noise?
- Dimensions of lower/upper C5 front control arms?
- Straight axle, curved road?
- Do you have a 73-77 A-body? If so, Hotchkis need to borrow your car.
- Steel C5 front control arms
- Woodward brand power steering reservoir?
- Frame side panhard bar mount
- Chp
- Can Shortened F Body Control Arms Work?
- rear suspension
- Disc upgrades who make some???
- Help please!!
- Best Suspension for 1st Gen Camaro
- Frt End Chassis Stiffeners
- Tie rod options
- Suspension suggestion wanted....Please
- Did I get the right hotchkis springs off ebay?!?!
- Global West sfc, NO instructions!
- 3 Link, Stop me before it's too late...
- Ball joint exstenders. No not those ones.. Suspension guys comment please
- Need some info on the Lincoln mark VIII rear end!
- ATS Spindles
- Question on what shocks to get with the hotchkis springs...
- changing the steering rack
- Choosing a ride height?
- G-body w/ATS spindles?
- Air Ride suspension
- What shocks???
- Torque arm question
- Performance Trends Help?
- Hotchkis Suspension best place to buy???
- Basic Sway Bar Question (newb)
- Spherical eye sway bar end links?
- springs rec's and coil-over question
- where to buy solid body bushings?
- '03 crown vic steering rack upgrade
- Need help with a Plymouth
- looking for guidance.
- Strange Coil over shocks
- Moog parts....what gives?
- Questions on GM A-Body suspension/chassis setup
- Rear sway bar or Factory "traction bars"???
- comments/suggestions on my Malibu wagon's setup
- 71 Cougar Ford 9" To 69 Camaro Conversion
- Quick Change Rear...
- Roll couple, Roll axis??
- DSE subframe is here
- best sway bars for a 70 chevelle?
- Rear end Width/Rear wheel Offset...
- questions on lowering my 69
- DSE Mini Tub, Where to Begin?
- Control Freaks A-Arms?
- What air ride controller to buy?
- Power steering plumbing, once and for all........
- Good and Bad news. Received my Art Morrison front clip today.
- Manual or power rack? Effort Unisteer
- who can fabricate custom spindles?
- leaf spring locating pin. need help
- shocks and springs for a G-body
- 1st Gen F Body Drum Vs Disc Track Width
- Finally putting the camaro back together! Need help with steering decision.
- 67 Lemans what to buy??
- room to spare after mini tubbing
- P-s-t?
- Hey Air Ride??? LOL
- Mustang II Help....
- Charger Handling Options
- Whats up with SC&C`s tel.#??
- People who really know QA1s
- Mustang front suspension suggestions
- Tie rod ends
- 68 shelby 3-Link
- OEM swaybars.
- Dropped Shocks
- Tie Rod sleeves
- 2nd gen shocks
- Differences between Bilstein and Hotchkis/Bilstein shocks?
- Widest Front Wheel on the Chassisworks Subframe?
- 1.35G on Air!!
- Whats everone using for tie rods n such on GM A Bodies?
- Please recomend good dropspindle for 73 firebird
- g-body shocks
- tie rod taper
- AIR RIDE 71 cougar/Mustang
- ATS spindle on Mustang II
- Tie Rods hitting oil pan
- length of link bars..
- Nova + ATS = what steering arm?
- Can't tighten LBJs enough
- Suicidedoors trailing arms vs. Currietracs vs. BMR
- 1st gen narrower track w/o new arms
- easier to install steering rack or engine 1st?
- GM vs. chrysler type leafs
- Can I keep up with vettes with my leaf springs?
- What will compliment my front set up?
- front steer racks Who?
- Looking for the GOOD pinion shims
- Upper Control Arm Location Question
- adjustable sway bars? D Pozzi..
- Rack And Pinon
- Relocating leaf springs on a 67 camaro
- Coil spring/lowering question
- RetroRides/Goodmark Industries 1st-Gen/4th-Gen Hybrid ?'s
- Schwartz Precision Chassis ?'s
- Best sub frame connectors for 67 Camaro
- AM max g chassis builds
- Size difference between the 670 and 800 steering boxes
- Question about alignment, or How bad would it be if ...?
- G Brace Re enforcements
- finally got started!
- SC&C suspension is in my Lemans pic's too!
- SPC UCA travel limits
- Basic C4 rack dimensions needed?
- Spherical bushings vs del a lums
- Steering Box: Is this a Fast Ratio 12:1 Box?
- How to Measure Scrub Radius & Ideal Radius?
- Need Help with upper and lower control arms
- 68-74 Nova Airbar
- Cutting Eibachs?
- use stock LCA?
- 2nd Generation Front End
- c-5 suspension
- Mr Matt Jones
- ATS vs B-Body vs G body w/ Tall upper bj
- Four Link Install Question
- '69 Camaro Front End alignment specs needed
- Heidt's has a new subframe..
- How much do springs come in on Mini tub?
- Super Duty lower ball joint help!
- A-body frt spring question
- leaf bushings question
- Something clunking
- Need a Power Steering Box
- Hotchkis front sway hits idler - 2nd gen
- AFCO’s Low Friction Ball Joints
- Inner Tie Rod Options.
- Baer Trackers.....Good? Bad??????
- Shake and noise.
- '93 Chevy 2wd truck??
- TC pump pulley ? Will stocker fit
- rear leafs way to low,, need some help
- 3 link rear suspension
Powered by vBulletin®