Activity Stream

Floater Parts Remember that floater that I showed you before? Yeah, I am not using that anymore. Remember that I said I would describe many things...

So this is where we start to take a change of direction/ I believe this will draw you in where before it may not have. I am a journeyman...

I've also found "touchy" power brakes can be the result of an incorrectly sized vacuum booster for the given system. The math to calculate how...

Adaptive Vr conditioner welded and installed so my ECU is capable of reading 4 vr sensors. Awaiting for a clutch switch to trigger launch control...

I got tired of waiting to have the glass guy to come to the body shop to finish the side glass install so I had to tow it to him this past week. He...

Those Holley accessory drive kits are very nice! I think Holley everything so far is very nice, actually. Wouldn’t the AC system have better...

Need to know at what pressure (43 or 58 PSI) those injectors are rated and what fuel pressure you'll be running. IMHO, the 65 lb injectors will be...

We are running the oil feed off the little block above the oil filter and the return will T off into a scavenge pump and will return to the valve...

I think any drive from 2009 through 2015 CTS-V will work. They all had LSA engines. Don

Sent you a couple on Instagram just now Matthew

If you dont mind , toss some pics my way as well. I am interested

sent you a pm for your email. thanks matthew

Hi Brian, Thanks for following along and the question. To be honest, I don't know anything about the Aeromotive controller. Your best bet is to...

Cool project! just wondering what your plans for oil and return for the turbos ? I'm doing a single turbo in the smugglers box on a 1970...

Thank you. All P.M's replied.

Just wondering what made you want to go to a power brake setup? I'm at a point in my build of my elcamino that I'm trying to decide to go manual or...

2016! this thread better have gone silent because you're too busy out destroying tires

Is that PWM controller similar to the Aeromotive controller? I ask as the Aeromotive in-tank pump on my Bird died (Stealth unit) and I replaced...

I had to modify my buckets for the Dapper HID conversion on my Camaro. It required opening the bucket up a little and cutting out a slot for the LED...

Some of the upgrade parts are rather mundane. I have always had manual brakes on the GTO, but as the goal for the update is to make the car a little...

Cool, my sister lives in the UK and I saw a similar model in London (had window roof pillars like the one tucked behind yours in the pic above). ...

Have you tried DSE? Maybe they can be of assistance with the dimensions? Andrew

I run them in both my '72 C20 Suburban and my '64 Corvette. In both cases, the stock buckets had to be "clearanced" but it was less than 1/16 of an...

Im interested and would like to take a look at this. I'm local. And will send you a pm now. Thanks,

Engine mounts were a challenge. In the end, I used Cadillac Escalade mounts welded to the chassis

Unfortunately I dont have a full photographic record of all the work, but will try to give you relevant highlights. First order of business was to...

Thank you Don What year accessory drive parts you are using ? I looked up some pictures , that should work. I found the bracket and pump in my...

"....And last. Fitting all those pieces to the front end. Man what a pain lining everything up. Still have some work there but moving along." I feel...

I am thoroughly digging this car already! Definitely keep up updated. That is cool and will be a fun handful to drive and enjoy too! Cheers, Brew

I’ll settle for someone providing exact measurements of their jig so I can fab one....