Activity Stream

I installed the Extreme subframe in my 2nd gen also. I had already raised the tunnel so no issues there. The engine did sit a little higher in the...

Wow. Can you post a pic of the ride height. This one has a Speedtech extreme subframe and their torque arm and only their Trans tunnel mod. ...

I helped a friend's build on 70 camaro w speedtech extreme frame, LS3, 6 speed magnum. To get the correct driveline angle, we had to cut the entire...

I’m still waiting for my mufflers, it’s getting kinda ridiculous and I might cancel the order. I did hear some sound clips on IG from a 71 Chevelle...

Is it aggressively loud? I'm thinking of buying a Corsa from 4wheelonline, although I don't want my exhaust to be obnoxiously loud.

Make sure to pay attention to your transmission angle. Generally speaking it should point a couple of degrees down. Don

These should be the last brackets that will allow me to use the Corvette C6 ZO6 brakes and E-Brakes on the 9 inch floater for the Cougar! Going to...

Thanks, Don. That's all really helpful.

LOL and you finally found one.

Pretty sure you have to use the forward most mounts on the block. After that you are trying to make sure your oil pan, headers, accessory drive and...

Have bought a wheel from him and would highly recommend!

I will do the ones you can’t see;-) and a friend of mine who owns a stainless steel and aluminum fabrication shop will do the pretty welds. Man must...

Nice job finishing up Pat! Are you doing the finish welding on the joints or do you have someone doing it?

Cutouts and S/S tips are fitted! Time to tig weld all the seams and have the exhaust ceramic coated to match the headers. Thanks Pat

I bought the same style of steering wheel from Jason a couple of years ago. Pretty awesome piece!

Just the tracks? or the whole regulator? Seems like alot of newer cars are using cable operated motors/regulators. I dont see why it would be too...

Given that this is a week old, I'm guessing no. Too bad because I am curious as well.

Count the valve cover bolts, 6=Windsor 8=Cleveland.

That car looks fantastic!

Having had a second gen Camaro and knowing the PIA of aligning all the body parts I think I'd do anything to find a hand to help including paying...

Too cool. Being a car guy the names Hoss Cocklin, Todd DeLay, and Greg Boxel may be familiar to you.

Thanks! Use to work at a car audio shop back in the day when fiberglassing contoured shaped speaker enclosures became popular. Owe all my composite...

Not by himself... Andrew

I would install the engine and trans without the shifter. Once the engine is in the final position, mark an approximate center of the shifter from...

Can you pull the front clip as a whole?

Yes you do need steering arms to calculate rack ratio. That has been my issue with most all of the "rack manufactures" flaming river, DSE, ect,ect...

Have a look here: https://www.pro-touring.com/threads/40904-1970-GTO-Version-2-0/page3 Starting at post #55 is where I go through the bellhousing...

I'm actually in Huntington,, 7 miles north of town.