Activity Stream

Very old post, but do you have any photos to close out this post? Always curious what others have done.

Congratulations Larry. Such a tremendous accomplishment. This virtual car club impacted my life in many ways over the years. Thank you -Steve

Update from this past weekend

It would depend on what he's looking for, but as for me it's pickup trucks all the way. Since you're asking here I'm also assuming he is looking for...

Welded and tin coated, next step will be for the painter

I would think it would need a heavier spring. The big block is at least a couple hundred pounds more than a small block. But maybe it will just...

Your right i see the hammer tone now. I'm not in love with that either, but at least it isn't red!

Hotwire and I have 4 door Chevelles. I purchased my 64 for $5300 with a straight 6 and 700R4, stock everything else. I horse traded and picked up...

First gen Firebirds cost considerably less than Camaros but share a lot of parts.

Yeah, the biggest thing people run into is that these cars aren't perfectly square anymore so when the rear carraige goes in, things need to be...

Looks like we have a deal. I’ll take it for our agreed terms via Pm.

Can you post a pic of the subframe with a note that has your username and the date on it?

If you want someone to sling it on, 8-14 hours. If you want to drive the car home with everything dialed in and you have 0 worries other than the...

Hi Pete, Been a while... Can't go wrong with any of the three brands listed. I prefer Ridetech monotube shocks over QA-1 twin tube. -Steve

The Concept One kits try to save you some brain damage when trying to figure out which adapter fittings you need for the ps pump, steering gear,...

Thank you! I’m doing a budget approach but not cutting any corners on the process.

The Concept One Hydroboost Reservoirs does have separate baffles for each -6 return port. Hard to see in the pic but they are 90 degrees apart and...

Some Pics from my recent photo shoot

Great videos, Very smart to cut the frame at the rear where the rails transition into the rear frame section. I'm sure a lot of other would have...

Another weekly update that mostly pertains to the Buick build. The frame has been shorted to correct the wheelbase and is ready for welding. I’ll...

They are trying to sell a subframe to a member here. Scammer using AI?

You can also get them in black hammer tone... it's the second picture in your link. FWIW I've had BMR suspension on my car for 15 years now and...

Only real downfall for me with those is that they are red and that won't work for me so I will have to have them stripped and re-powdercoated.

Test fitting the new wheels. I have a clearance problem with the valve stems on the front wheels so I got some shorter ones on order. Ignore the body...

I got my taillight project completed. Normally I would get my brother to do the firmware but this time I did all the programming myself. What would...

Then I got to work running all the airlines and parking brake wiring harness to the rear of the car. I drilled a hole in the trunk and ran all the...