Activity Stream

Test fitting the new wheels. I have a clearance problem with the valve stems on the front wheels so I got some shorter ones on order. Ignore the body...

I got my taillight project completed. Normally I would get my brother to do the firmware but this time I did all the programming myself. What would...

Then I got to work running all the airlines and parking brake wiring harness to the rear of the car. I drilled a hole in the trunk and ran all the...

Installed the rear brakes. I was originally going to get some ebay Telsa parking brakes and fab up some brackets but I got lazy and brought Wilwood's...

Installed the rear end with the air shocks and ride height sensors. The Wilwood attachment point for the caliper brackets made a convenient location...

Order my rearend for Quick Performance. I had them weld on the brackets necessary for the Ridetech suspension and muscle bar. I also had them power...

I realized that I still need to install some sideview mirrors while doing the bodywork. I like the look of the Mustang mirrors although they don't...

I'm long overdue for an update. Year 2024 was spent doing the body work and getting the car into an epoxy sealer. I haven't decided on a final color...

Right. All of their posts are just a little off.

I like BMR and have used their parts before. Price and quality are definitely good. The other Plus about the BMR lower control arms is that they are...

:confused:

AI Bot?

- Detroit Speed: Known for their high-performance subframes, Detroit Speed offers a range of options for the '69 Camaro. Their subframes are designed...

Pm'd - - - Updated - - - ...

It takes an hour to get everything out of the box, unwrapped, inventoried, and then carry the waste out to the dumpster. I am a competent shop, 40...

Bump for lower price.

Ready for final assembly. Wiring done and everything works. Had to run through the VHX setup again but got it working with the ECU

So i started my own business and I'm trying to get back on this car. I want to get the rear end and suspension ordered. Do you think this one would...

This looks like only a touch display, how are you actually controlling the Vintage Air and Dakota Digital systems?

not sure why you’d want to do that…

what kind of time frame did this happen in?

Great build

For a competent shop 8-14 hours sounds realistic. No way is that 40 hours of work.

yep, what Don Said

Holley Hydramat is supposed to work on losing fueling when the tank is low. Supposedly, as long as fuel touches the sock anywhere it'll let the pump...

A few more updates, I got the blower back from jokerz performance, started routing the plumbing g for the supercharger intercooler hoses. I hope to...