Activity Stream

I did not make that message. I am not the profile Dremos. Do your business with Dremos since that is who you have been in contact with apparently...

Ttt

As you can see above, your pm to me instructed me to contact your friend Martin. If your not scamming, which my gut told me you might be, then why...

Motor and transmission mocked up, time for the exhaust to turbo tubing!

Car looks awesome. I have been there on the kidney stones. The one bad thing my dad passed on to me. Hopefully they will pass good luck!

Awesome!

Not only will the gear ratio, tire size, and HP goes in to figuring top speed. I would hope that I’m stating the obvious to you that there’s also...

i agree, i would seek more rpm and a taller tire.

I’m running a Wegner front drive. Amazing customer service and product. https://www.wegnerautomotive.com/

From others on here it seems the ideal backspacing is +6mm. That's 5.5" for a 9" wheel and 5.75" for a 10" wheel. Couple options if you want to...

Good advice. I sort of knew that, in practice, but this is a different game for me. I work in aviation, and we sometimes replace lines. The metal...

With insufficient wrap on the pulley you can get belt slipping and squealing under load. If it slips you lose your power steering assist which is not...

I've got a 67 short bed NP435 D100. The driveshaft is out right now so I can snap a pic or 2 if you'd like. -Ed

Don mentioned above the belt wrap on the steering pump as well. Can you elaborate on what you guys are seeing here in terms of advantage and...

The chin spoiler on my 70 LeMans is from a 70 Judge- reproduced and easy to find

I could make them work but these are "stiffer" than normal for an LS engine. My car will also be an aluminum block and 4spd so it will be pretty...

I have about 700 miles on Drive Junky drive, 68 Camaro LS1. No problem at all. The belt wrap on power steering is the key reason I went with it....

Why does and LS causing you to not need them anymore?

I put on the custom license plate frame on tonight. Thanks named the car Bullwinkle after a friend suggested it and a couple days later died...

On those hoses, make sure there's enough room for engine mount flex. The engine will move, the radiator will not, and very short pieces will...

Still haven’t made a decision on this. A lot of the Speedtech guys are running the Drive Junky accessory drive and then upgrading the PS pump to the...

I hear ya on the kidney stones. Just went my third round in tens years with them. It's amazing just how much pain one of those little ******* will...

Hard to go wrong with a square body Chevy.

Yes you can easily run a 10" wide rear on a 70 Chevelle. Common backspacing for that would be 5.75

Wow, that is quite the compliment. There are some fantastic build threads on here.

You should be proud, thats a very sharp car. And more importantly, I think it achieved your goal of a Volvo/Ferrari hybrid. Definitely in the top...