Activity Stream

Not the most recent pics I have, but the paint job got done, the body is on the restored frame & 100% UMI Performance suspension, getting a 468 Stage...

Sweet, thanks!

Nice job the car looks great. I love the spoiler in the front.

That link is exactly what I needed. Thank you!

So I've thought about this. When you say they will continue to loosen up I assume you mean the actual holes in the square tube will wear and "egg...

Okay thank you Andrew.

I think .200" is a good number. As the clutch disk wears, that gap will close. Andrew

White letters, definitely, and it's a crying shame that it's hard to find them anymore. Very few brands are doing the white letters.

I’m using a single clutch from silver sport. My second question is though, should I use the third shim to bring my measurements to .145 or just run...

This seems pretty close to the VA trinary fan switch, which I believe is 265psi. Andrew

I like the white letters. Andrew

It all depends on the flywheel and clutch you are using. If you did the measurements correctly, and you need shims, use shims. Andrew

Did you slug the upper control arm bolt holes? If not those will continuously loosen up with driving. Just trying to save you having to do this after...

I may have answered my own question with the right combination of google search terms. The 2000-01 Cherokee had a low-pressure switch in series with...

I think there is only one generation of Volts...so any..Mine was from a 2015 Andrew

It looks like it's only a sensor, but there is a small controll board built in that generates the PWM signal. Good info here:...

Update The LS2 is in the car now, and I have traded the 4L80e in for a low mile GTO T56, which will now go with the car. All pedals, master...

It seems like the controller is integrated into the fans and the only external part is a temperature sensor so I’m not understanding how this can be...

Thanks Andrew, does it matter which year the Volt fans come out of?

Thank you. That diagram showing how they need to be parrallel helps a lot.

I think it will look better if all the parts are black. Don

Drag Radials are not typically recommended for manual transmissions which tend to work better with a bias ply. Also a bias tire will likely be...

Bump, still for sale

What about just the middle two

Got the rear seat springs painted, Rustoleum Gray.... The back portion.... The bottom portion....

It fits the car.