Activity Stream

Not yet, soon! Thanks - - - Updated - - - soon! Andrew. - - - Updated - - -

Do you have video of the car in the sun? Would love to see that color in sunlight,,..,

You might consider chopping off the ends of the A-arms and replacing them (weld/fabricate) with a newer ball joint deal. Then you could put a newer...

For rebuildiing, Look for Seat belt Planet, I think they're in Oklahoma. Do really nice work.

I have rear drums for now. I guess thats another point to consider, because eventually I would like to go to rear discs.

Somehow, we feel "entitled" to hearing a vroom vroom video. I mean, this has been kinda like a "relationship", of sorts. At this point, we have .......

Great to hear the Jimglo trailer is highly recommended here. My uncle needs one to transport a couple of vintage car projects. I'm coming over to his...

Sweet. It's been working for you? The 9x9 opening is enough room there to service what you'd like? Alright, well that answers that question...

Yes, vroom vroom please!

I use the DSE on all of my builds. If you position it right there is adequate access for the fuel pump. Don

You can close up all those holes if you are routing your hoses through the blower hole on the far passenger side. Don

Here is the DSE door going in my 68. I have a Vaporworx tank also

I thought the entire VA system runs through the big hole directly next to the passenger side front fender (not pictured here). No?

You're very welcome. They do have quite a bit of flexibility with regard to how fat the hose/wire/tube they're protecting is. If you heat shrink...

Sold....Thank you sp68cvert

Sold...Thank you astross89

Amazing work.

By membrane do you mean something like Dynamat?

All PM's Replied too. Ridetech fuel cap ...SOLD Fesler trunk hinges ...SOLD

Assume you are going to make a new hole for the Vintage Air bulkhead?

Depends on front suspension geometry (caster, scrub radius, wild negative camber...etc), tire size and weight. At a stop, manual steering is going to...

Don't think anyone has mentioned this yet, but you need to look at the tires you are using for the build. A lot of builds switch to low profile, high...

Gettin' close!

Another option is a modern e-brake caliper. I have a pair that fit late model Ford Fusions, Lincoln Mkc's and others in that size category. There are...

I will for sure. I hope we get to find out what the issue was. All the specs on the unit make it sound like it should be pretty hard to use in "the...

Beatiful car. I like mustang too but I would not even consider selling rhat car to get one. Just my opinion :)

When you say "I'll just fix this one area", it just exposes more and more spots that need attention. Fixing that trunk lid gap grew into an entire...