Activity Stream

Can't wait to see progress on this!

Car is getting on deck, ready for a little love

The basic top layout of the center section is a "picture frame" made from 2 x 3 x .125" tube and the mounting brackets are all made from 3/16" plate....

I took the subframe out from under the car to start fabricating the rear frame. In an effort to keep things as compact as reasonably possible, I got...

I was just going to touch on that myself. The lower LB rating would be fine for any hobby cars I have but I decided to spend a few more $ and get the...

Also in the above picture you can see, in the bottom left, a piece of 2 x 3 tube that will be one of the frame rails that will go to the stock leaf...

The way I decided to approach the rear of the car is to fabricate a rear frame section that will tie into where the stock leaf spring mounts were...

Thanks for the heads up. That’s what I went with and I thought I had the camaro 2010-15ss calipers but BBU got me squared away. They are gen6...

Next up I made another jig locate and level the rear subframe similar as to what I did up front. This make things so much easier when you start...

Well its been quite a while so its time for another long over due update. From my last post, I have been focused all attention on the rear of the...

That kid with the hammer is going to be shaving before you’re done! As an earlier poster said, “Dance, monkey, dance!” We need more content if we’re...

I posted my 69 while it was in paint jail and I was frustrated. Since it was painted I removed the price and asked ad to removed. It was posted and...

Yes, make mount for tunnel and use the Wilwwod dual e-brake cabke kit to connect it

Rocker panel are dirty in picture, factory SS rocker trim holes are all present. Underside pictures

I think the plan is to use an iPad, in a similar fashion. I had planned to put it in the center of the dash, but I am reconsidering. I think it would...

Presumably a well engineered product would have substantial margin. I would expect 20-50%. That being said if the 7000 pound version is only a...

Thanks guys! That was super helpful.

Yeah..... That video is amazing.... Been using the 5000lb version for my GTO for years..... I trust it. Do I place jack stands under car...

Love 3rd gens!

Here ya go Andrew https://youtu.be/YVZ-CcF0_MY

20x12s, toyo. Cheap $1,3k https://www.shoppok.com/corpuschristi/a,43,218197,20x12-wheels-toyo-tires----1-300--Cc-.htm

A ceramic coating is to protect that quality paint. Paint is finite so everytime you polish to remove scratches and swirls, quality paint will...

Agreed with above. I spend alot of time detailing and on detailing forums. Most ceramic coatings can be removed with a light or medium polish,...

Hey guys, thanks for checking in and the concern. I’m doing fine and progress on the car slowly continuing. I did get COVID in early December which...

Hey Bernardo from France! Jason aka tankmasterj from Arkansas usa! Lots of great engineering going on in your rig. Keep it up I love checking in on...

I love it. I had a. 55 for me and 57 for my wife. Sold both . Mine before finishing bees before starting. I regret selling both. Now neck deep in my...

Very nice fabrication work