Activity Stream

Holley retrobright on 68 w/o RS package. no modifications. Nice white lite with cut-offs.

Can you read the axle id code ? it should be on the rear of the right (pass) axle tube . That would be a good start . id also consider taking off the...

I think I forgot to mention that I did end up changing the rear axle. I know it’s an unpopular opinion but I’ve always preferred wheels with a flush...

I’m at that point we’re I pulled all the mock up parts off the car, now I needed to fix the cut outs I made for the exhaust and the cold side going...

Donny, As per phone call yours are going out in the next batch over the next two weeks. srode, I backorders are going out over the next two...

You are correct higher delta will transfer faster. Also parallel will minimize pressure drop.

Sorry to hear about the rough patch buddy. That build sounds interesting! What do you think you’d put it into? I agree on that rear driveshaft...

Sure, so the unit itself comes from a 2002-07 Saturn Vue or 2005-06 Chevy Equinox. I got mine as just the power steering assembly for $50 from a...

A concern is that arm: https://www.cachassisworks.com/p-2950-camaro-67-69-f-body-nova-68-72-x-body-z28-quick-ratio-steering-arm-billet-aluminum.aspx...

Somehow I missed the painted pics. July was kind of a blur- being pushed out of a job and date of my father's remembrance. Always a huge fan of...

I have not used either of those brands, but I have run a factory Delphi 670 (no longer available) and a Lee Power Steering 800. The Lee boxes are...

Bump! $3200+shipping

Bump, make offers

Bump! 2 masters left, rotors,etc. Make offers

Hey John, If you get a chance to let folks know when you expect to be caught up on the backlogs that would be helpful. I checked the website the...

Thanks for the detailed information. I think for now I will leave it as is and see how it goes. If the AITs are too high, I will re-evaluate at that...

You can run brushed fans PWM with a fan controller like the C6 corvette used but it really is better using a brushless fan. One less thing to...

Okay. When?

Thanks, I will look into those. My plug gap is at.030"right now.

Cool project! It has been changed.

I run dual fans and wire them like GM does their setup from the factory. Look up LS1 fan wiring diagram, uses 3 relays, puts the fans in series on...

Seeing some progress… (never mind the horribly offset front wheels, just rollers for now)

On the cold side I needed to make some beads around the ends to help hold the connectors/clamps to the tubing so I took this cheap bead roller and...

Nice updates! Could you share a little more about the Vue EPS and how you attached it inline with your column? I see the flange on the upper side of...

That solenoid cover you had 3D printed is really cool Andrew. Not sure if you want to or not, but I'll bet you would could sell those.

This post is provide an update as to how the car and myself have been performing since the last post. List of events since last post: HSSC 03...

I'll take the DSE pedal bracket

You will need a brushless fan to do PWM control with Holley ECU. Spal makes some nice fans. The Monster fan sold by Vintage Air is a Spal fan. Wizard...