Activity Stream

My previous daily was a squarebody C10, and I ran 1060lb 1-ton coilds up front and "Big 10" (8?) leaf pack out back. It was firm, but ride quality...

Following the RPS instructions, I brushed the supplied lapping compound on the input shaft splines. Then I took both of the disks, one by one,...

In order to handle the extra power as well as having many other benefits, I chose to go with the RPS Twin disk carbon-carbon clutch from Tony Mamo. ...

I would go down to Ace Hardware and check out what they have on the shelf.

Thats going to be one killer ride for sure. In regards to interior stuff......I can't exactly speak from any experience on any other specific car...

This cold air set up is the Gray Area Steel carbon fiber version. Frank has really created a nice system, you can see the options here within the...

Thank you, building this thing has been very satisfying

K5108 is fits the 1967-1974 Novas and K5108 fits the 1975-1979 Novas. There were never any "factory" 1/2" taller ball joints. The 1967-1974 share...

what cold air intake tube is that?? thanks Scott

I am not aware of any OEM tall balljoints. You are stuck with the sources you listed afaik. One of the Moog variants might be a problem solver...

yes, he has tubbed the rear

you interested in the 67 camaro lsa, 6spd, ac, full tmi interior, heidts front subframe, ford 9inch , wilwood brakes, ccw wheels.???

Does anyone know if there is a difference between the MOOG numbers K5108 and K5208 Both show they fit a NOVA, was hoping that the k5208 was the 1/2"...

I never received a PM. My message box was full. I am cleaning it out right now.

After blasting, I found an area under the sill plate that needed replacing. The hood hinge bracket on the cowl was too high. I lowered it and got...

Check your PM

Did you try the Speedway wheel fitment tool yet? If so, how did it work out?

A few more client pictures. “ Best LS Swap CARBON FIBER Cold Air Intakes on the market” $899 + shipping. For any one running an LS , MAF or...

Thank you very much

More pictures / videos of this beautiful build please!! The wheels look phenomenal!! Do you have an Instagram account for your car?

Thank you all for your feedback so far! We're looking for ways to implement the suggestions & please: keep them coming! This month we've...

Welcome aboard, very nice car!

Welcome, both options will work if you're sticking with the stock spindle i would reach out to kore3, they should be able to get you hooked up. If...

I have a 66 frame off Built 435-LS7, built auto trans, 4-corner coil overs, 4-wheel disc brakes, sway bars, tubular suspension. Power windows ...

Wow, that is a neat solution! I've never heard of these before. Thanks for sharing them.

I imagine you've heard of them, but if not, I really like the Kaizen Speed relays. They're solid state and the wires clamp internally so no external...