Activity Stream

I found a nice dipstick/tube from Hughes Performance in Phoenix. It's 22 inch long comes with locking stick. They also have one for a truck...

Call CCW. They will give you a true three piece wheel in that style in whatever configuration you need.

Supposedly 315 is largest you can run in nnthe back of a 67 even with minitub. I wonder will 315 work on this rear 20x12? I've got. A 67 minitubbed

The rear is back together and ready for installation. I couldn’t be more impressed with the Ridetech and Baer components. The quality is outstanding....

Thanks Tdishon, when I started laying stuff out I bought a corvette frame section that had the bolts attached, I believe they’re 14mm (about 9/16”)...

Welcome to the world of Pro-Touring. You will meet a lot of great people and will find lots of help here. Feel free to start a build thread in the...

Oh looks like the next step up in pulley drops it to 1.6:1 With idle at 1K - alternator runs at 1600 rpm. May not turn on that low. Might work...

This is not a V belt system. This is a custom circle track race setup by KRC. The main drive is a 6 rib serpentine belt. The alternator belt is a 3...

Just confirmed. I bought mine from hose warehouse. Summit had a fitting for $26 and hose warehouse had it for $12. You will save a good amount of...

Our builds have similarities with the work on the RUST and some mods. Getting towards the finish on a 7 year 64 F-85 "post car" Great JOB. I stayed...

bump it up only a couple mount kits left!

bump it up only a couple mount kits left!

Yep, Progessive has the stuff. They built my basic chassis and I am in the process of fitting everything, cutting, fabbing mounts for everything and...

Ok here are some fabricated adaptors that might give you some ideas: ...

The bolts that hold the cradle to the frame are pretty large. I can find out the threads later, but the length varies from 9 1/2" to 12 1/2" long....

I am a very visual person and I've done most of my fabrication by eye over the years. I'm learning to better utilize computer programs and more...

245 35 19 and 335 30 19 - - - Updated - - - I have 345 30 19 0n the back now

The wheels look good on there.

chocolate milkshake of death ---

The car looks great Dan, nice work.

You won't regret it. Andrew

I have, and they seem pretty slick, but IMO I’d rather build something than pay someone else to build it. Yes time spent at it will make up for the $...

If making a mock-up helps you then do it. there are some things I like about adapting other stuff to your project. but making your own can be...