Results 1 to 16 of 16
-
06-25-2008 #1Registered User
- Join Date
- Jun 2008
- Posts
- 78
SBC Pulleys,Brackets, Serpentine? Help w/ selection...
OK, I'm down to pulleys/brackets
SBC, 73' Camaro I don't have 10K in the block, it's just an old 4-bolt w/ around 300 HP,
I've only got about $1500 in it.
I don't want old school v-belts
I will run AC and PS
I am looking at Vintage Air Front Runner or Billet Specialties Tru Trac, but I'm not looking to drop 2000$+ on a setup (I can't see putting more $ into a pulley set than I have in the whole block)
So, my criteria
- Low Cost
- AC pump on pass. side
- serpentine belt(s)
- standard resevior PS is fine
- no need for polished or flash, natural finish is fine
So, what branckets/pulleys do you recommend or run yourself?
or just bite the bullet and get a Front Runner?
Update>>> I succumbed to the power of the aluminum truss of the V.A. setup, order placed<<<
Anyone with one with any feedback?
-
06-25-2008 #2