Project Juggernaut

[shockrod]

Been awhile since I have been on here and updated this thread so here goes. The 408 didn’t work out this year, so…. I have been putting a couple hours here and there in on the car, but between, school, family and life, it’s been awhile since I accomplished anything. I did finish tucking the front bumper, and while at it shaving the antenna, and hood ornament. I cut the impact absorbers and moved the bumper in about 3”. Then I filled the trim holes and filled were the tag goes. After that I molded the plastic cover into it with fiberglass. I intend this winter pull fiberglass molds, and build the assembly out of fiberglass and save +-50lbs off of each end of the car. Now on to the rear bumper.
No more antenna Hood ornament gone