Results 1 to 20 of 41
-
07-16-2008 #1Starting The Transformation
- Join Date
- Nov 2007
- Location
- Pittsburgh,pa
- Posts
- 252
DSE Minitub 1970 Nova install with pics
Just started my install tonight. This will be a slow project, but will post many pics. Tonight I worked for about 1 hr and removed the rear end and drilled out the spot welds on the drivers side at the trunk support mount and the rear seat support.
1. Step 1 Pull the rear end and any interior that may get hurt by cutting,grinding,welding.
This is the spot weld cutter I am using. It is a WIVCO "SPOT-EZE"
3. Third Drill the spot welds for the trunk support mount and the back seat bracing.
These are just a couple before pics.
Last edited by ls1 nova; 07-16-2008 at 10:22 PM. Reason: Lack of info
-
07-17-2008 #2