Results 1 to 20 of 23
-
05-05-2010 #1
Spun my diff on the axle tubes-what now?!?!
Hey guys,
Sooooooooo I was driving along, rolling into second gear as I left my neighborhood, and ka-pow! I broke the Factory plug welds on my axle tubes and spun the diff right around them.
I'd rather not ditch this rear as I literally juuuust loaded it with new gears and a truetrac and have all the brackets for my four link on it, so can anybody help me think of a way to reset the pinion so I could then ringweld the tubes back?
-
05-06-2010 #2
You might be able to turn the tubes back in the right direction. I recommend that you use a housing fixture to be sure that everyting is straight when you get them in position. Then weld them like this. http://www.nastyz28.com/forum/showth...ing+axle+tubes
'69 RS/SS396 pro street/427/4spd/9"
http://rides.webshots.com/album/576443881hfGXxd
http://good-times.webshots.com/album/568860081GZRpyZ
-
05-06-2010 #3