Results 1 to 7 of 7
Thread: firewall smoothing question
Hybrid View
-
07-31-2009 #1Registered User
- Join Date
- Jan 2006
- Posts
- 292
firewall smoothing question
I've got a kinda general question about firewall smoothing...
I had my body work done about 2 years ago, and needless to say, due to my budget and being a student at the time, I wasn't able to afford everything that I wanted at once. My car is almost driving, but I can't help but look at my firewall and wish I could have had it done. Considering the amount I've spent on my car, I feel like I HAVE to do this the right way.
So how hard is that going to be to have my firewall smoothed after the car is running? I realize I'll have to pull the front end and motor, but that's fine. And if anybody has any suggestions as for a good shop that can do it in California (northern OR southern), I'd appreciate it.
-
08-27-2010 #2Registered User- Join Date
- Nov 2006
- Posts
- 70
08-29-2010 #3Registered User- Join Date
- Dec 2007
- Location
- michigan
- Posts
- 370
depending on your car, plates can be purchased and welding in place, or even put on with adhesive. Then its a matter of blending in the surrounding areas.
2005 CBR 1000RR..."mostly stock".
1968 camaro... "in the works".
08-29-2010 #4dont do it!!!!!!!!
if you are that close..
just DRIVE IT!
08-29-2010 #5