Results 21 to 40 of 83
-
01-02-2014 #21Starting The Transformation
- Join Date
- Dec 2010
- Location
- Ventura, CA
- Posts
- 173
-
01-02-2014 #22Starting The Transformation- Join Date
- Dec 2010
- Location
- Ventura, CA
- Posts
- 173
01-02-2014 #23Starting The Transformation- Join Date
- Dec 2010
- Location
- Ventura, CA
- Posts
- 173
01-07-2014 #24Starting The Transformation- Join Date
- Dec 2010
- Location
- Ventura, CA
- Posts
- 173
01-07-2014 #25Starting The Transformation- Join Date
- Dec 2010
- Location
- Ventura, CA
- Posts
- 173
01-07-2014 #26Starting The Transformation- Join Date
- Dec 2010
- Location
- Ventura, CA
- Posts
- 173
01-09-2014 #27Starting The Transformation- Join Date
- Dec 2010
- Location
- Ventura, CA
- Posts
- 173
In total, the windshield is laid back 2-3/4" and the total chop is 1-3/4". In the earlier pictures the windshield wasn't fully laid back yet. Here's the final height.
Once the welding and cutting started to happen, it was apparent that some more rust repair needed to be done. Since that was happening anyhow, Justin decided to take out the hard edge and smooth it out a bit.
Here's some more pictures.
01-09-2014 #28Starting The Transformation- Join Date
- Dec 2010
- Location
- Ventura, CA
- Posts
- 173
01-13-2014 #29Starting The Transformation- Join Date
- Dec 2010
- Location
- Ventura, CA
- Posts
- 173
Here's a few more for today.
The doors are being fitted as well as a quick mock up of the front sheet metal. The metal work on the fenders placed the core support a little too far back, so we'll fix that and it should be good to start raising the wheel wells a bit.
I really like the core support. It mocked up really nice and will give the truck a clean look.
01-13-2014 #30