Results 1 to 2 of 2
Thread: Shockwave w/UCA
-
06-04-2006 #1
Shockwave w/UCA
Hi everybody,it's been awhile. I have a new project '70 Challenger,at present lots of body work has been accomplished,an IRS is being constructed for it,the engine is a 440,The front suspension required changing the K member,and I want to use the .96 torsion bars with the new air ride Technology shockwave system which is adjustable with an air bag. This lowers the front end 2 1/2",which is where I want to be.
I would like to know if anyone has used this setup,and if so what they think of it. The problem I have run into so far is that here are very few options for the E body. This looks like an answer,but this is all uncharted water for me. Any help you can give me will be appreciated. It's nice talking to you guys. I do come out of the cave occasionally.
-
06-06-2006 #2
Whose front K member are you using? I though they were all setup for coilovers, eliminating the torsion bars.
-