Results 1 to 4 of 4
Thread: Minitub ??
-
12-17-2004 #1
Minitub ??
I am almost ready to weld in my passenger side outer wheel house and continue with the minitub on that side, but I have a question first. Should I completely weld the outer wheel housing in place before doing the minitub (I'm widening the factory inner housings)? Or, should I clamp it in, mock up the inner housing, widen it, tweak both inner and outer to get a perfect fit if needed, then weld the outer followed by the inner?
Nathan
-
12-17-2004 #2
just clamp or lightly tack it, then you wont have as much trouble fitting it all later on if you need to move it
68 Camaro - never to be finished
06 Silverado - Forged 370, L92 Heads, big cam, 4l80e ect. eventual donor for the above
http://www.youtube.com/watch?v=KmB2y7uX38I
-
12-20-2004 #3Registered User
- Join Date
- Aug 2004
- Location
- Albuquerque, New Mexico
- Posts
- 609
How much of a PITA is it to minitub a 1st gen f-body?
-
12-22-2004 #4