Project: Camaro 68' P/T Muscle

[Tweak]

I felt the same about wiring too. I just went at it one wire at a time. Will wait till engine is in to finish ecu loom and tidy up under dash. The aw looms are very long and need lots of trimming to be tidy. Fire wall forward now.

Beautiful job! I'm getting close to wiring, not looking forward to it.

[Tweak]

[Tweak]

Centre dash complete, Big Red shifter knob looks good.

[ragz]

Awesome job,great build, and obviously you are up for any challenge, looking forward to more progress.I also think the ECM and fuse box are best in the glove box.

[Tweak]

[Gmc427]

hi, what diff raito have you gone with?and what tko od ? picked up a 68 roller and want to set up with tko and rear gears to suit,going to pinchbest bits of my monaro project,ie bbc 427 13/12 wilwood kit auto and tall gears can stay with holden,need to have some fun,regards george

[Tweak]

Hey
I went with .82 overdrive box and 3.55 diff gears. Should keep it around 2100rpm at 110 kph.. Didn't want a big old sloppy overdrive here in NZ. I drive mostly back roads and stay off the highways where possible.

Cheers

hi, what diff raito have you gone with?and what tko od ? picked up a 68 roller and want to set up with tko and rear gears to suit,going to pinchbest bits of my monaro project,ie bbc 427 13/12 wilwood kit auto and tall gears can stay with holden,need to have some fun,regards george

[Tweak]

OTR ready to 3d print. Should be interesting to see how this comes out

[67SSDan]

OTR ready to 3d print. Should be interesting to see how this comes out

Oh THAT should be interesting!

Dan

[Tweak]

[Tweak]

[Centerforce]

We really like seeing 3d printing technology popping up in more and more build threads. What type of glue do you plan to use to put the pieces together? Plastic epoxy?

[Tweak]

Hey
I am using h8000, mainly because we have it at work, yes it's an epoxy 2 part glue. Sets in 30 minutes
[027 200 4950QUOTE=Centerforce;1220472]We really like seeing 3d printing technology popping up in more and more build threads. What type of glue do you plan to use to put the pieces together? Plastic epoxy?[/QUOTE]

[Tweak]

Will detail after she been fired up

[67SSDan]

Dang man, that turned out great!!

Dan

[Tweak]

Just waiting for engine tune guy to come out home then we will fire her up.

[Tweak]

Fired up today with a base tune ready for the dyno

[Gmc427]

Yeah mate..drew them up an had them laser cut..Folded them up. There is smaller ones on the inside to create the box..tried to make them look like they were fitted original..

hi,any chance of getting a copy of drawings?also are you running solid mounts aswell?regards

[Centerforce]

Congrats on getting her running! Sounds nice and healthy!

[Damn True]

That intake plenum is really nicely done. Congrats.