Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 1 of 1

    Thread: 67 Camaro

    1. #1
      Join Date
      Aug 2003
      Location
      Byhalia, MS
      Posts
      656
      Country Flag: United States

      67 Camaro

      I have decided to put my project car on the market

      Details:
      67 RS car. It is an early build. Bolero Red with black vinyl top. Factory console with gauges and tach. Black deluxe interior. Tinted windshield. Interior bright trim. Big ole bumper guards. Powerglide car with 12 bolt rear. 4 wheel manual drum brakes. All of which has been changed for a more modern setup, except the 12 bolt.

      First was rust repair...

      Dash top
      Toe boards
      LH and RH floor boards
      Center trunk pan
      NOS outer wheel houses
      NOS quarters
      Patch lower corners of front fenders
      NOS header panel

      I built a rotisserie and finished all the welds and sandblasted the majority of the car. I then finished the bottom all the way up to high build primer.



      It took me several years working on the car every now and then to get all the above done. I then got burned out on the car and it sat for a few years with very little progress made.

      Flash forward to today...

      I had a friend build me a 4L60E trans with all upgraded internals. It will be utilizing the Baumann Optishift trans controller.
      I had so many new SBC parts laying around that I scraped my LS1 build and put together a 450 horse SBC 350.
      I put all new bearings and new Moser axles in my factory Eaton posi, 3.73 12 bolt rear diff with a 'Jegs' aluminum diff cover. Need to find someone to weld up the tubes.
      I recently purchased the ridetech AirBar with their new single adjustable coilovers.
      Speedtech ATS Chicane front coilover mounts for the stock subframe.
      ridetech upper and lower control arms
      DSE 600 steering box
      Ridetech Tru Turn setup
      DSE subframe connectors
      DSE firewall fill plate
      DSE mini tubs
      Vintage Air Gen IV hvac setup with billet controller
      Custom center console modeled after the 67 original gauge console, but with an arm rest and cup holder
      Lokar billet 6" shifter
      Lokar LED shifter display bezel with boot
      2000 Trans Am front electric leather seats
      Billet steering wheel
      Cheesy Ebay aluminum radiator
      LT1 electric fams
      Spal pwm fan controller
      PI Vigilante 2600 converter
      B&M trans cooler
      -AN fittings
      SS hardlines
      Wilwood 13" 6 piston front brakes
      Wilwood 12.19" rear brakes
      G-Force transmission crossmember
      EMS billet hood hinges
      EMS billet trunk hinges
      EMS billet tail light bezels
      Hotchkis front sway bar
      LED tail lights and 05 Grand Am LED center brake light. Will be inserted in rear spoiler
      AAW Classic update wiring harness
      18" C6 Z06 Motorsports wheels
      Nitto NT 05 tires

      There's lots more. Just too much to list

      A literal steal at $28,500...Serious inquiries only please and NO, I will not part the car out. My email is [email protected] and my phone # is 901-four 8 six-zero 3 5 zero

      Link to build thread...http://www.lateral-g.net/forums/showthread.php4?t=35882




    Advertise on Pro-Touring.com