Results 1 to 2 of 2
Thread: TPI setup
-
08-17-2012 #1
Registered User
- Join Date
- Aug 2012
- Location
- va
- Posts
- 6
TPI setup
Not sure how many people would be looking for this set up. I have a 89-90 TPI system setup for a vortec small block this is a complete system from the upper intake to the fuel pump. The computer is a 90 Corvette set, the harness if a painless system that uses all stock TPI sensors and relays which will go with the system. It have an MSD dist with a external mounted coil system has barely any miles on it since putting in 32lbs injectors the computer has a custom burn chip for the 32lbs you will also get the stock 19lbs injectors along with the stock chip and another chip for 24lbs injectors. The 32lbs and 24lbs chip was built around a .477/.480 lift cam with gear drive.
looking to get at least $800 for the complete TPI setup might be able to come down some.
-
08-24-2012 #2
Registered User
- Join Date
- Aug 2012
- Location
- va
- Posts
- 6
bring back to the top still available
Reply With Quote
