Results 1 to 5 of 5
-
04-08-2012 #1
Help with a serpentine/blower combo fitment
I am hoping someone has run a similiar setup.
67 camaro--Small block chevy----weiand 144 blower----with some sort of serpentine belt system.
I would like to put the v/a front runner system on.......or even a factory GM type (out of a 90's truck) that everyone talks of.
My concerns are that I buy a V/A system....it doesnt work...and I cannot return it.........or that the Gm style tensioner on the pass side will hit the blower snout.
Or that the pulleys on the water pump and crank shaft will be bumped out to far for the crank pulley of the blower.
If anyone has run both a (serp.system) and one of these blowers I would love to know what will fit before I buy.
All these forums do similiar swaps, but I cannot find anyone with a small 144 style blower.......that snout seems to be my hang up.
Here is a current pic so you know what I got.....
Thanks guys
CAN YOU BUILD PROTOUR ON A BUDGET?! NOT!
Time isn't something you have!
It's something you make!