Results 1 to 8 of 8
  1. #1
    Join Date
    Feb 2010
    Location
    Rohnert Park CA.
    Posts
    595
    Country Flag: United States

    Default Speed Tech this one is for you!!

    So I just got it my torque arm in last fri I got it from Jegs at the same time I got a fab 9" from them the kit I got from them is the 9" kit but I don't know if the kit will work with the housing I asked them at the time I placed the order and was told it would all work together hope you can help me with this thanks!!!!!!!!!

  2. #2
    Join Date
    Feb 2010
    Location
    Rohnert Park CA.
    Posts
    595
    Country Flag: United States

    Default

    this is the rear end Jegs told me would work with this kit hope this helps



  3. #3
    Join Date
    Feb 2005
    Location
    Indianapolis, Indiana
    Posts
    323
    Country Flag: United States

    Default

    Don't know if this will help, but it was on Speedtech's Website. Similiar housing:

    http://www.superchevy.com/technical/...all/index.html
    Ben Mowery

    67 Firebird -Powered by Pontiac w/ RAM AIR V.

  4. #4
    Join Date
    Jun 2001
    Location
    Winter Springs, FL
    Posts
    10,100
    Country Flag: United States

    Default

    You should call Speedtech and ask them directly.
    John Parsons



    II Much Fabrication's Blog -- New products, Fabrication sequences, etc.

  5. #5
    Join Date
    Mar 2005
    Location
    St George Utah
    Posts
    1,025
    Country Flag: United States

    Default

    what he said ^^^^^

    Not sure how many Jegs has installed lately?

    Normally when someone wants a fab housing we have them shipped directly to us to install all the brackets in house

    About the only issue you will run into that I can think of is the rear lower torque arm mounting brackets will need to be modified to fit the housing the ones that come in the kit are for a standard Strange housing.
    you will need to assemble the third member and install it and the pinion mount install the housing on the torque arm, and see how the rear tabs will mount keep the pinion angle at 0 when setting it up to tack the rear tabs on.
    any other questions? 1-888-467-1625
    Blake Foster
    www.speedtechperformance.com
    435-628-4300
    St. George Utah.
    it's always sunny here.

  6. #6
    Join Date
    Feb 2010
    Location
    Rohnert Park CA.
    Posts
    595
    Country Flag: United States

    Default

    Thanks. Blake!!!! This is good news can't wait till I have all this in the car I will be ordering my drop out this week and I will call you when I get closer to bolting it in one more ? I have the 1/2 hight mounts on the car now the ones that come in the kit are for stock hight right? If so I can cut them down to fit thanks a million!!

  7. #7
    Join Date
    Mar 2005
    Location
    St George Utah
    Posts
    1,025
    Country Flag: United States

    Default

    yes you will need to cut the supplied rear body mount to the correct height to work with the 1/2 height body mounts,
    Blake Foster
    www.speedtechperformance.com
    435-628-4300
    St. George Utah.
    it's always sunny here.

  8. #8
    Join Date
    Sep 2010
    Location
    Beach Park IL
    Posts
    1,573
    Country Flag: United States

    Default

    Quote Originally Posted by killer69 View Post
    Not sure how many Jegs has installed lately?
    This made me smile, thanks!
    Donny

    Support your local hot rod shop!



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •