Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 4 of 4
    1. #1
      Join Date
      Dec 2007
      Location
      Atlanta, GA
      Posts
      54
      Country Flag: United States

      1970-1973 Firebird Front Air Dam

      Does anyone produce a one piece front air dam for early first gen. Firebirds similar to the one used on first generation Camaros and Firebirds in the attached photo?Name:  1969 Camaro Splitter.jpg
Views: 6894
Size:  35.1 KB

      Mark Z.
      1968 Firebird
      2016 Mustang GT w/ Performance Pack
      2014 BMW X5 Turbo V8, AWD Highway Cruiser
      1970 Firebird Formula 400 (Gone but never forgotten)


    2. #2
      Join Date
      Dec 2007
      Location
      Atlanta, GA
      Posts
      54
      Country Flag: United States
      I actually meant to ask about an air dam for early SECOND generation Firebirds 1970-1973.

      If none re produced has anyone modified a stock TA center section to make a one piece similar to the first generation ones shown in the photo?

      Thanks and Merry Christmas!
      Mark Z.
      1968 Firebird
      2016 Mustang GT w/ Performance Pack
      2014 BMW X5 Turbo V8, AWD Highway Cruiser
      1970 Firebird Formula 400 (Gone but never forgotten)

    3. #3
      Join Date
      Apr 2010
      Location
      Portland, OR
      Posts
      357
      There is one that I've seen from one of the big repo companies. It's supposed to be a standalone that you can add TA type flares to if you want. Can't remember the parts place though. There is also a red 2nd that is bad ass on this board I think that has one. I'll try to find the place and post back. POst if you find anything because I'd like to run one too!
      1973 Firebird 466 Pontiac, T56, C5 Brakes, PTFB and Hotchkis suspension
      2011 Camaro SS Supercharged, ZL1 body and brakes, Z28 suspension.

    4. #4
      Join Date
      Feb 2005
      Location
      Sydney, Australia
      Posts
      1,798
      Country Flag: Australia
      I bought the centre spoiler repro ABS unit for my car...using it without the T/A style wheel spoilers. It can bolt on by itself with or without the wheels spoilers. Its about 3" deep.
      I got mine from Classic Industries who have three different front spoilers....one stand alone fibreglass, one repro centre section fibreglass and this one, which is urethane....my friend was actually in Classic's showroom and inspected all three for me and bought the urethane one as he said the others were no where near as good in finish.

      http://www.classicindustries.com/fir...ts/f15210.html
      Regards,
      Leigh

      Sydney, Australia
      1971 Firebird 455

      https://www.pro-touring.com/showthre...Project/page27





    Advertise on Pro-Touring.com