Results 1 to 20 of 176
Thread: Sky Skrape’s ’66 Nova Wagon
-
06-30-2011 #1
Registered User
- Join Date
- Jun 2011
- Location
- SoCal
- Posts
- 885
Sky Skrape’s ’66 Nova Wagon
Owner: Tim "SkySkrape" Katz Vice President/Co Founder TAPOUT LLC
List of vendors helping with the project:
The GMR Full Floater
Becool Aluminum Radiator
Currie F9 housing, 35 spline axles(boost is in this engines future), 3.70 Platinum Trac, billet yoke, billet pinion support
GM Performance Parts E-Rod Crate engine
Total Cost Involved Pro-Touring front clip & Torque Arm rear Suspension
Tremec 6 speed
Wilwood 14" 6 piston front, 14" 4 piston rear
Ricks Stainless
Dynamat
KO Rims
Toyo Tires
Magnaflow
Wraptivo
Turbonetics
Autometer
Planned completion date is SEMA 2012.
Tim has a busy week with the Nationwide race in Florida and UFC 132 in Vegas but next week the thrashing begins.
A little moch up picture with a 315/30/18 :yes:
-JLast edited by Sales-TCI-Eng; 10-30-2012 at 03:26 AM.
www.totalcostinvolved.com"Quality doesn't cost, it pays"
-
06-30-2011 #2
Registered User
- Join Date
- Dec 2009
- Posts
- 1,607
Originally Posted by Sales-TCI-Eng
Nice car! How exactly does a car not yet built get an optima invite? I might want to get in that queue...Ron in SoCal
69 Camaro in progress
http://www.lateral-g.net/forums/showthread.php4?t=31246
Used to be known as flash911
06-30-2011 #3
Registered User
- Join Date
- Jun 2011
- Location
- SoCal
- Posts
- 885
LOL, sign me up too. Originally Posted by Ron.in.SoCal
-Jwww.totalcostinvolved.com"Quality doesn't cost, it pays"
06-30-2011 #4
Starting The Transformation
- Join Date
- Sep 2009
- Location
- Arizona
- Posts
- 446
oh man, mr katz!
cool build none the less!
Jason
06-30-2011 #5
Registered User
- Join Date
- Jun 2011
- Location
- St. George, Utah
- Posts
- 1,629
Oooooo, A Nova and a Wagon, now there's the perfect combination...
06-30-2011 #6
Registered User
- Join Date
- Nov 2008
- Location
- Lawrenceburg, TN
- Posts
- 4,083
Originally Posted by Ron.in.SoCal
no really?? Originally Posted by Sales-TCI-Eng
I have worked with and for Ricks First Generation, Classic Industries, Speed Warehouse and Steves Camaros, and Gotellis speed shop now, and i have never seen an invite??
How do I get on the list also??
06-30-2011 #7
Registered User
- Join Date
- May 2002
- Location
- Northern California
- Posts
- 10,716
big names bring big exposure and high viewing numbers. Its all about bringing the numbers.
MrQuick ΜΟΛ'ΩΝ ΛΑΒ'Ε
06-30-2011 #8
Full Blown G-Machiner
- Join Date
- Sep 2010
- Location
- alpine ca
- Posts
- 657
man i cant wait for this build ive actually found my old 62 wagon and am trying to buy it back from 11 years ago
john1972 NOVA SPEED TECH TORQUE ARM AND FRONT ARMS , RUSHFORTH NIGHT TRAINS, DRIVERZ INC
BUILD LINK
https://www.pro-touring.com/showthre...t-(GREY-MATTER)
06-30-2011 #9
Registered User
- Join Date
- Nov 2008
- Location
- Lawrenceburg, TN
- Posts
- 4,083
so you can buy a spot with money and exposure, no skill needed? I have been going about it all wrong, all the driving schools, track time, car building, suspension dialing and all I had to do was get on TV and sell t-shirts? I feel stupid Originally Posted by MrQuick
06-30-2011 #10
Starting The Transformation
- Join Date
- Sep 2004
- Location
- SoCal
- Posts
- 238
^^^This Originally Posted by MrQuick
Plus this isn't Tim's first rodeo so I am sure he has plenty of connections.
-J'04 IS300 VVTi GTE swap GT35R etc (dead tranny - looking for LS swap)
'63 Street Fighter Nova(Sold)
'06 Magnum SRT8 KIA 10-25-13
07-01-2011 #11
Registered User
- Join Date
- Dec 2008
- Location
- Lehigh Valley Pa
- Posts
- 1,269
That is quite the cage. Looks like there is very little back seat room. Watching with alot of interest.
1996 Federal Cadillac hearse
1988 Eureka Chevy hearse
07-01-2011 #12
Registered User
- Join Date
- Nov 2010
- Posts
- 1,387
This monster will be sick!!!!!!!
68 Camaro RS twin turbo
https://www.pro-touring.com/threads/...d-Intent-V-2-0
1993 Toyota Supra 6768 Built Single Turbo
Slow Lifted Jeep No TURBO :(
Randal F
07-01-2011 #13
Registered User
- Join Date
- Jun 2011
- Location
- SoCal
- Posts
- 885
Stock sized back seat was compromised with the addition of the tubs but the cage didn't help any. He is either going to run one bucket in the middle or a small contoured bench. Originally Posted by The Stickman
-Jwww.totalcostinvolved.com"Quality doesn't cost, it pays"
07-01-2011 #14
Registered User
- Join Date
- Sep 2010
- Location
- Minneapolis, MN
- Posts
- 19
I have a slightly larger wagon in my futrure. I will be watching this one closely.
07-10-2011 #15
Registered User
- Join Date
- Jul 2011
- Location
- Costa Mesa
- Posts
- 63
Engine and trans are out as of last night
07-13-2011 #16
Registered User
- Join Date
- Jun 2011
- Location
- SoCal
- Posts
- 885
*update
Engine and stock clip are out, new clip has been moched up
-Jwww.totalcostinvolved.com"Quality doesn't cost, it pays"
07-13-2011 #17
Registered User
- Join Date
- Feb 2011
- Location
- Kalamazoo, MI
- Posts
- 144
Awesome! Keep up the progress!
1969 Pontiac GTO
-The Nameless project.
0331, USMC, Semper Fi.
02-26-2012 #18
Starting The Transformation
- Join Date
- Sep 2009
- Location
- Arizona
- Posts
- 446
Sky Skrape's Red Nova...
Last edited by The GMR; 02-26-2012 at 05:52 PM.
02-26-2012 #19
Registered User
- Join Date
- Sep 2005
- Location
- Nor Cal
- Posts
- 2,196
.........
1968 Camaro widebody project
2004 Mustang LS2
1964 Continental
2014 Keezer
02-27-2012 #20
Registered User
- Join Date
- Feb 2011
- Location
- CA
- Posts
- 255
Tapout!
Pretty impressive line up of sponsors to be rubbing elbows with.....not bad for a white kid from the OC!
Reply With Quote
