Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 2 of 2

    Thread: Engine Mock up

    1. #1
      Join Date
      Apr 2005
      Location
      Plantation, FL
      Posts
      60

      Engine Mock up

      After 3 long years I finally got my 69 Camaro ready for paint, but the last thing I need to do is mock up the engine and trans. I want to trial fit everthing to make sure it fits and cut the floor for the shifter and and center console.

      Is there anyway to do this without buying the engine and trans now? I know it will be quite a while before the car will be running and I would rather not have the engine and trans sitting around for a long time. I am going to put in an LS3 and a Tremec 5 Speed in the car.

      Otherwise I guess I need to start looking for somewhere to buy an LS3 and Trans.

      Thanks

      Steve
      69 Camaro


    2. #2
      Join Date
      Jun 2007
      Location
      Farmingville, New York
      Posts
      70
      Check out http://www.payr.com/

      They are'nt what you'd call cheap, but it's the only way unless you've got an extra block laying around.



    Advertise on Pro-Touring.com