Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Page 1 of 27 1 2 3 4 5 6 11 ... LastLast
    Results 1 to 20 of 586

    Hybrid View

    1. #1
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,083
      Country Flag: United States

      1968 Camaro Project Plain Jane (1sickT8)

      I have been watching many builds and I guess its my turn to chronicle my car, Plain Jane (a.k.a. 1sickT8) well It started out as a lucky find in Foster city California, An older lady wanted to sell a camaro for $100, so i thought I would go look at the car, HECK for 100 dollars I thought even if it was a crapper there's got to be more than 100 dollars worth of parts on it for resale? right?



      after she opened the garage I thought,,, I could work with this







      nothing inside the car but a few parts! hey a FREE Turbo charger!



      and a few more parts in the trunk



      Time to get it on the trailer



      a little rain, whats an adventure without rain



      one last look around the ladies garage and I found a power glide trans, a drive shaft and a back seat!! that's a start!!


    2. #2
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,083
      Country Flag: United States
      Got the car home with the help of a friend (thanks Ante) he's only 19 and a great kid- at this point I start taking the car apart just to see what I have to start with



      with the frame out, I started clean up, my girlfriends son (Kyle)was a great help turning some wrench and lifting the body parts




    3. #3
      Join Date
      Oct 2009
      Location
      Houston, tx
      Posts
      123
      Good Luck with your build!

      I love these kinds of builds, the starting from a rusted shell and building from there. You have all the options in the world and you can turn the car into anything you want!

      The threads where people start with a tired car with a little rust and tear them down just aren't as romantic.

      Oh, and I am sure you know that it costs like twice as much to build them as apposed to buy them, so get ready!

      I can see the LS9 in your future right now (wink)
      David
      1968 Camaro in many pieces

    4. #4
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,083
      Country Flag: United States
      Thanks MARO Having the blank slate is tough!
      here's the front sub frame Stripped down



      First I weld all the seams on the frame for reinforcement and then I sent it to Peen Rite for a shot peen to help reduce Resistance Fatigue (torsional resistance) and here's the frame after peening and some charcoal grey paint



      while the frame was away relaxing(pun intended) in sunny southern california,
      We built a Wooden body trolly to roll the car around the garage and roll it outside



      and Here my girl friends son Kyle is sand blasting the body outside and working on those lower quarters rusty areas(he's a quick learner)



      as the day worn on and it became dark Kyle moved on to firewall clean up inside the garage, Radio going in the back ground and a portable heater

      Last edited by Rod; 02-12-2010 at 11:29 AM.

    5. #5
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,083
      Country Flag: United States
      time to replace some sheet metal first the rear floor sections, and the the tail panel



      that was easy!!! but this tail panel!! Wow!!


      drill out all the spot welds

      and more welds










      gotta fit and fix it all now



      Tail panel almost fitted!!

    6. #6
      Join Date
      Jun 2009
      Location
      Cape Coral, FL
      Posts
      323
      Country Flag: United States
      Great build so far! Man I really need to think of a good project name lol

      What are the plans for the car?

    7. #7
      Join Date
      May 2014
      Posts
      2
      Country Flag: United States
      Quote Originally Posted by Rod View Post
      Thanks MARO Having the blank slate is tough!
      here's the front sub frame Stripped down



      First I weld all the seams on the frame for reinforcement and then I sent it to Peen Rite for a shot peen to help reduce Resistance Fatigue (torsional resistance) and here's the frame after peening and some charcoal grey paint



      while the frame was away relaxing(pun intended) in sunny southern california,
      We built a Wooden body trolly to roll the car around the garage and roll it outside



      and Here my girl friends son Kyle is sand blasting the body outside and working on those lower quarters rusty areas(he's a quick learner)



      as the day worn on and it became dark Kyle moved on to firewall clean up inside the garage, Radio going in the back ground and a portable heater

      Where's kyle's eye protection?

    8. #8
      Join Date
      Jan 2010
      Location
      Oxnard Califas.
      Posts
      62
      Work looks good, nice to see the young guns involved. Not many teenagers around here seem to know anything about old steel. Good job.
      The Blurr!

    9. #9
      Join Date
      Oct 2009
      Location
      Houston, tx
      Posts
      123
      Could you tell me more about what you did to the front frame?
      David
      1968 Camaro in many pieces

    10. #10
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,083
      Country Flag: United States
      Quote Originally Posted by 1968Maro View Post
      Could you tell me more about what you did to the front frame?
      the factory frames are just stitched welded every few inchs, I simply welded all the seems on the frame completely, this helps stiffen the frame, then the frame was SHOT PEENED, its almost like Abrasive Blasting but with Abrasive Blasting their intent is to clean the material using different cleaning medias, when you Shot peen it is a cold working process (using a specific material, spray pattern and pressure) in which the surface of a part is bombarded with small spherical media called shot. Each piece of shot striking the material acts as a tiny peening hammer, imparting to the surface a small indentation or dimple. In order for the dimple to be created, the surface fibers of the material must be yielded in tension. Below the surface, the fibers try to restore the surface to its original shape, thereby producing below the dimple, a hemisphere of cold-worked material highly stressed in compression. Overlapping dimples develop an even layer of metal in residual compressive stress
      I worked in a aluminum manufacturing plant and we also peened Scuba tanks that were used for deep dive projects (to increase there strength) It makes the frame material harder and relieves any torsional stress (twisting)
      peen rite describes it better and more complete on there sight
      Last edited by Rod; 02-12-2010 at 02:05 PM.

    11. #11
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,083
      Country Flag: United States
      the tail-panel is on firewall is getting smoother time to set some fenders on the car



      shot some rust proofing paint under the dash on the headliner area and on the roof






    12. #12
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,083
      Country Flag: United States
      the firewall is almost smooth and I just need a block off plate to weld in the AC hole and then shoot some color here so I can start reassembly



      here's the color under the dash



      and the subframe looks awesome now going back into the car


    13. #13
      Join Date
      Apr 2007
      Location
      Utah
      Posts
      534
      Looking great Awesome that you are involving the kid. Make sure you teach him about safety gear. Sandblast silica can be hazardous to your health. But awesome work.
      Sam
      Northern UT.
      '68 Camaro "Bodacious"
      '56 210 2dr "Buckshot"

    14. #14
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,083
      Country Flag: United States
      The young Guys have been a great help from day one just spending hours picking up the car, collect the parts, eating the lunch I bought them !! and the Ideas they have! whew!

    15. #15
      Join Date
      Aug 2004
      Location
      Suisun City, Ca.
      Posts
      792
      Very nice progress, and great to have the family involved.
      Mike

    16. #16
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,083
      Country Flag: United States
      Quote Originally Posted by mdprovee View Post
      Very nice progress, and great to have the family involved.
      Thanks mike!! even the girl friend is into it

    17. #17
      Join Date
      Feb 2006
      Location
      Idaho Falls, Id
      Posts
      1,342
      I can't believe you bought a 68 Camaro for $100, last time I saw one under a few grand was a totally rusted out one about 10 years ago a guy wanted $500 for
      Traven

    18. #18
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,083
      Country Flag: United States
      Quote Originally Posted by T_Raven View Post
      I can't believe you bought a 68 Camaro for $100, last time I saw one under a few grand was a totally rusted out one about 10 years ago a guy wanted $500 for
      It was complete luck a friend of mine has 2 cars and his buddy has a car and an old lady (a friend of a friend) ask him if he wanted to buy her old car for 100 dollars(her crack head son had taken it apart), but they both thought it was a joke and didn't even look at the car for a week, they were arguing about going out to the casino or go look at the car, I over heard them and asked what car, "some 100 dollar junker some old lady wants to sell" I told him if you don't want it i will take it, he said "fine man its yours" but were not helping you tow that crap, and now it was mine

    19. #19
      Join Date
      Feb 2006
      Location
      Idaho Falls, Id
      Posts
      1,342
      Quote Originally Posted by rusty68 View Post
      It was complete luck a friend of mine has 2 cars and his buddy has a car and an old lady (a friend of a friend) ask him if he wanted to buy her old car for 100 dollars(her crack head son had taken it apart), but they both thought it was a joke and didn't even look at the car for a week, they were arguing about going out to the casino or go look at the car, I over heard them and asked what car, "some 100 dollar junker some old lady wants to sell" I told him if you don't want it i will take it, he said "fine man its yours" but were not helping you tow that crap, and now it was mine

      Nice, I bet your buddies are kicking themselves
      Traven

    20. #20
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,083
      Country Flag: United States
      getting some headers on
      First i wrapped them with Thermo Tecs exhaust wrap, and spayed them with there High heat paint and Spectre wire lock exhaust bolts



      I cleaned up the rear end with new gaskets bearing, Axel seals and brake lines, for now (mock up) I will leave the rear drums till I get a rear disc kit together




    Page 1 of 27 1 2 3 4 5 6 11 ... LastLast




    Advertise on Pro-Touring.com