Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 1 of 1

    Hybrid View

    1. #1
      Join Date
      Dec 2007
      Location
      Camp Hill, PA
      Posts
      43

      700R4 Pressure Test

      Hi,

      I have a B&M 700R4 and I performed a pressure test to ensure I have the TV cable set correctly. My readings at Idle with the TV connected all fell into the ranges provided by B&M. However, when I disconnected the TV all of my pressures increased to full TV even though I didn't pull the TV cable to it's WOT position. Is this normal or do I have something going on somewhere?

      I check for a Short Spring Syndrom with the TV connected at idle and pulling on the TV cable and the pressure immediately jumped, so I figure the TV Plunger/Valve is in the correct position at idle.

      John





    Advertise on Pro-Touring.com