Results 1 to 20 of 25
Thread: More new parts from Anvil
-
10-28-2008 #1
More new parts from Anvil
Here are some pictures of some products we will have ready to sell soon.
We are coming out with hood vents that can be applied to any 1st gen hood (steel, carbon fiber or fiberglass). You just need to cut holes in your hood and screw on. Great for twin turbo set ups. The left side shows aluminum screen in the openings and the right side is open. The screen, of course, can be painted black if desired.
Here are our 1st gen spoilers available in high gloss and satin finishes and are made to fit all 3 years. They are patterned after the originals, but tightened up in the corners for a more refined look.
Here's our '69 gauge panel that will also be available in glossy and satin finishes. It is customizable with an optional 2 small gauge cluster that can go where the vent and/or HVAC panel would normally be. Lower areas for the wiper and lights are left to you to use whichever switchgear and locations you want. Two main gauge holes will fit 3 3/8" or 5" gauges.
We have our 67/68 gauge panels in stock, but only in glossy for now.
MaTT
ANVil Auto
www.anvilauto.com
_________
'69 Camaro
'73 Camaro
'96 Viper GTS
'70 Bronco
'10 Camaro SS
'65 Riviera GS
'69 Mustang Sportsroof