Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 5 of 5
    1. #1
      Join Date
      Feb 2007
      Location
      Tinley Park, IL
      Posts
      1,163
      Country Flag: United States

      Differences in 3-point seat belt brands?

      I asked this in reply to the other tread about 3-point belts, but it was a few days old, so hopefully it will get more attention here.

      I'd like to install 3 point seat belts in my 69 Cutlass hard top. I knew of the Morris Classic Concepts belts at Jeg's and Summit. But after reading the other thread, I learned that there are other, cheaper, alternatives.

      Julianos $90 per side w/hardware http://www.julianos.com/3_point_belt.html
      Wesco $80 per side w/hardware http://www.wescoperformance.com/i-32...le-install.htm
      Morris Classic $280 both sides http://www.jegs.com/webapp/wcs/store...CSB-1-BK&pos=8

      Are the Morris belts a superior product? Do they only cost more because they are being sold thru a big retailer?



      I'd like to do this soon, as I have my interior partial taken apart.

      Thanks

      Nick ~
      1969 Cutlass


    2. #2
      Join Date
      Apr 2001
      Location
      The City of Fountains
      Posts
      15,971
      Country Flag: United States
      I would like to hear from people that have installed any of the above products.

      Andrew
      1970 GTO Version 3.0
      1967 Cougar build
      GM High-Tech Performance feature
      My YouTube Channel Please Subscribe!
      Instagram @projectgattago
      Dr. EFI
      I deliver what EFI promises.
      Remote Holley EFI tuning.
      Please get in touch if I can be of service.

      "You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her

    3. #3
      Join Date
      Jun 2006
      Location
      NW burbs IL
      Posts
      1,732
      Ditto and to add to the mix.

      http://store.gotbelts.com/lapacshbe.html

      I'll be installing into a 69 Camaro and believe that CarlC used these in his Camaro.
      Matt


      Current project: " Chain Reaction "

      A.K.A. " BIG " by wife, biatch in garage.

      1969 RS Camaro L92 T56 Quadra-link, CW sub, Ford 9" a progressive build.

      Ex track car: 1995 Camaro LS1 T56

    4. #4
      Join Date
      Dec 2004
      Location
      SC
      Posts
      360
      I have the Morris belts. While they are not a compitition belt, I've been satisfied with them for 3 years in my 1st gen Camaro. I have delux door panels and late model Camaro seats, and they are a snug fit between those. I did have to tweak the retractor bracket a little.
      They cross my shoulder comfortably too.
      The top bracket bolts to holes already in the roof.

    5. #5
      Join Date
      Aug 2004
      Location
      England
      Posts
      1,042
      As they say do not compremise on safety.





    Advertise on Pro-Touring.com