Results 1 to 6 of 6
Thread: TH400 To a carbed 5.3?
-
01-09-2008 #1
TH400 To a carbed 5.3?
Not to familiar with the gen III engines, but anyone know if I can run my th400 with a 5.3 gen III engine?I dont really wanna spend $$$ to get a 60e or 80e plus controller,just tryin work with what I got for the time being to get the velle on the road, any input will be appreciated.thnx guys and gals
-
01-09-2008 #2they will work together. Alot of drag racing guys run the the 400 with LS1's. There is an adapter bracket that is needed and the cost isn't much.
LS1tech.com has quite a bit of information on this topic and where to buy the adapter plate.
Andrew
01-09-2008 #3thnx for the reply, I wont be doin any drag racing, hows the reliability and drivibilty on the street? or should I just go with 700r4 as recomended by a friend?
01-09-2008 #4TH400's are tough trannys, but for everyday cruising and driving a 700r4 is defintely the better bet. Personally, I would go with the 4l60e, which will bolt right up to your 5.3.
Set of twist machine paddles and you are all set! good luck
01-18-2008 #5Registered User- Join Date
- Aug 2004
- Location
- Texas
- Posts
- 254