tubular a-arms for 73 camaro?

[Camaro_Dan]

Hi.
I would like to know if there is any company that makes tubular a-arms for second gen camaros?



I know GW makes upper ones, but I also want the lower ones for QA1 coilovers like for the 67-69 camaro they make.

Thanks for any help.

Daniel from Sweden.

[Zefhix]

Fatman Fabrications- called the front steer set. Available stock or 2" narrowed
http://www.fatmanfab.com/05page21.htm

[Camaro_Dan]

thanks! I wounder if there are any other company that makes tubular a-arms.
would be good to hear som experiences too. of the a-arms aswell as with the companies that make them.

Thanks

[David Pozzi]

I have the GW uppers on my wife's 73 Camaro.
I would think GW will make lowers soon, but I have no special info from them. I have some photos and info on my web page.

Speed Tech may have uppers, don't know about lowers from them, but I'd think they should be coming...
David

[WS6]

i have never delt with a company that had better customer service than fatman. had an upper and lower pair for a 72 chevelle. the upper ones would not fit this car. they took them back and built a custom pair at no charge. didnt pay shipping at all either and didnt mind that they were already powder coated black by me.

ill be buying a set for my 79 from them.

[David Pozzi]

Just be warned the Fatman uppers don't appear to have the added caster the others do, so there is no gain in handling.

[WS6]

thanks for the info. i didnt know that, but then again i dont know the most about handling setups. i have the stock caster setting for my formula, have the toe set to stock as well because i drive that far everyday and my camber is only -.5* to again keep from wearing my tires out too soon.

[79T/Aman]

check Heit's www.heidts.com very nice parts and less $ than GW

[Piet]

Piet is lurking... I have the same question for my '73. Have heard good things about Heidt’s Hot Rod Shop .

[Lowend]

I have a buddy who managed to get a set of lowers from GW... They are out there, just not advertised.