Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 1 of 1
    1. #1
      Join Date
      Sep 2004
      Location
      Near Dayton, OH
      Posts
      547

      Which EFI controller to use?

      Just curious on everyone's opinions on what would work for my engine/car setup?

      I've been looking at using the Megasquirt V3.0 for a long time but am still a little unsure if it will work as well as some of the more expensive units?

      My setup is an '87 Olds Cutlass Supreme that I am currently trying to finish.

      Engine: 437cid (.060" over 425) Olds Big Block
      Ported cast-iron heads
      Hydraulic roller cam
      (230/236 dur. @.050, .622"/.625" lift,112* LS)
      Offenhauser Super-Sonic intake with fuel injector bungs welded in
      1000-1500cfm throttle body

      Trans: Stock '96 T-56 6-speed (for now)

      Rear: 8.5" 10-bolt with 3.73 gears (for now)

      I'm hoping to get the engine in the 500-550HP area naturally aspirated with a possible 100-150HP nitrous shot later on.

      Any ideas on what I should be looking at? Driveablity is key for this car! It won't be driven daily but I also don't want to be scared to drive it 500 miles either.

      Thanks for the help,

      Andrew
      1987 Olds Cutlass Supreme FE3X Clone
      EFI455/T56/9" w/ 4.30 gears
      __________________________________________________ __





    Advertise on Pro-Touring.com