C5 Corvette suspension adaptors

[Joris69velle]

Hey Guys.

Iv made 10 sets of steel adaptors to adapt the c5 front suspension and subframe to a custom frame(rail).
I was building a set for myself and then decided to make some more sets as i feel there might be some interest for these.
These could be easily welded to a 2x4” frame rail and would save much time on measuring and getting the allignment right.
Ive used the stock frame rails for the dimensions so everything lines up as it would in the Corvette

Made out of 3/16” thick tubing and laser cut plates.
Fully welded
Grade 8/ 10.9 metric hardware
30 1/2” between frame rails (when using 2x4” rails)








600$ usd shipped within the United States and Canada

Text or email me at 226-970-2453 or [email protected]

Thanks

Joris

[ryeguy2006a]

Very cool!! Any install pictures?

[dhutton]

Those are pretty nice. A lower cost alternative to the Dobbertin adapters I used on my 56 Cameo. I like that they use the stock shocks. Do you have rear adapters too?

Don

[Che70velle]

Well done sir. Very nice!

[Joris69velle]

Very cool!! Any install pictures?

Hey no havent had time to cut up my latest project car haha

[Joris69velle]

Those are pretty nice. A lower cost alternative to the Dobbertin adapters I used on my 56 Cameo. I like that they use the stock shocks. Do you have rear adapters too?

Don

Thanks.
Yes just wanted to keep them low cost and easy to incorporate.
No. Not yet at least.

[dhutton]

Thanks.
Yes just wanted to keep them low cost and easy to incorporate.
No. Not yet at least.

Keep us posted if you develop the rears. Thanks.

Here’s a Facebook group.
https://www.facebook.com/groups/436548567200056

[Joris69velle]

Keep us posted if you develop the rears. Thanks.

Here’s a Facebook group.
https://www.facebook.com/groups/436548567200056

Thanks for that link

[Joris69velle]

7 sets still available

[David Sloan]

How’s the alignment as far as specs? Same as the corvette or improved?
Looks good!