need help on speedtech front subframe rack

[qnitro]

I need some help, Ive only built cars with steering boxes and its obvious on those, but which is high and which is low on this rack? Im installing a PS Derale cooler as well, but cant seem to think this one threw.. Ive looked at the videos on line when you do it wrong I took one cap off to make it easier to point out..



Thanks ahead of time

[dhutton]

Here you go Kevin:

https://sweetmfg.biz/uploads/files/line%20diagram.jpg

Don

[qnitro]

Don, hey buddy, my question is looking at the the 2 hose ends, is the top the pressure side or is the bottom??

[carbuff]

On mine I have the line closest to the rack as the pressure line, and the line closest to the u-joint as the return line. Which I believe matches the image Don posted also.

I think that Sutton told me that there is a P or T cast into the servo housing also, but it's hard to see down in there...

[qnitro]

Thanks... I will make sure to check, The good thing about Don living so close I can make house calls to his house.. He has my 69 Camaro(getting ready for paint) So gives me a reason to go bug him while hes working on the Nomad..

[dhutton]

On mine I have the line closest to the rack as the pressure line, and the line closest to the u-joint as the return line. Which I believe matches the image Don posted also.

I think that Sutton told me that there is a P or T cast into the servo housing also, but it's hard to see down in there...

Yep, line closest to rack is pressure per the diagram I posted.

Don

[qnitro]

Youre the best, I waiting for the derale mounting brackets to get here thursday.

Yep, line closest to rack is pressure per the diagram I posted.

Don