Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 4 of 4
    1. #1
      Join Date
      Nov 2005
      Location
      zachary louisiana
      Posts
      606

      Ls1 rear brake swap

      Just started back on my car after it sitting for 9 years.. swapping ls1 rear brakes on my 69 camaro. So far I have 2 lh backing plates. Calipers rotors the wheel studs ext . Question is about the lines. I don’t have the factory lines from the donor caliper So I’ll need those .. my car has drums now so what do I need to connect the lines from the calipers to the hardline on my axle
      1969 camaro ss 372,hotchkis tvs, comp cams 268xe, world products heads, zz4 intake, 670 holley, msd setup eagle alloy 212's, autometer ultra lites......99 console with megashifter, ls1 brakes and a soon to be 700r-4
      http://http://www.cardomain.com/ride/2246580

    2. #2
      Join Date
      Nov 2005
      Location
      zachary louisiana
      Posts
      606
      And since I am using 2 lh backing plates do I need 2 lh calipers
      1969 camaro ss 372,hotchkis tvs, comp cams 268xe, world products heads, zz4 intake, 670 holley, msd setup eagle alloy 212's, autometer ultra lites......99 console with megashifter, ls1 brakes and a soon to be 700r-4
      http://http://www.cardomain.com/ride/2246580

    3. #3
      Join Date
      Mar 2005
      Location
      Loganville, GA
      Posts
      931
      Country Flag: United States
      Kore3 has brake lines that will the stock hard lines and have the right connection at the caliper, I used them on the El Camino I had. No adapters needed.

      I do believe you need 2 LH calipers.
      2018 Cruze LT Hatchback
      2003 Suburban 2500 8.1L
      1975 MGB Roadster
      2003 GSX750F Katana

    4. #4
      Join Date
      Oct 2009
      Location
      Amherst, OH
      Posts
      524
      Country Flag: United States
      ^This.....



      I believe the pics in my build thread are working again (stupid photobucket), and I did the same swap. Check out the link in my sig....post #24
      Josh

      1968 Firebird project thread - https://www.pro-touring.com/threads/...41#post1180941






    Advertise on Pro-Touring.com