Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 6 of 6
    1. #1
      Join Date
      Nov 2011
      Posts
      25
      Country Flag: Norway

      LS1 Power steering hose

      I have a LS1 from a C5 Corvette in my -69 camaro.
      What kind of fittings do i need on the servopump? Have Unisteer rack and pinion

    2. #2
      Join Date
      Apr 2001
      Location
      The City of Fountains
      Posts
      15,977
      Country Flag: United States
      What style fittings are on the Unisteer rack?
      1970 GTO Version 3.0
      1967 Cougar build
      GM High-Tech Performance feature
      My YouTube Channel Please Subscribe!
      Instagram @projectgattago
      Dr. EFI
      I deliver what EFI promises.
      Remote Holley EFI tuning.
      Please get in touch if I can be of service.

      "You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her

    3. #3
      Join Date
      Nov 2011
      Posts
      25
      Country Flag: Norway
      They use 14mm 16mm and 18mm Banjofittings.
      I'm don't remember wath I have. I'm at work wont be home in a couple of weeks so I can't check.

    4. #4
      Join Date
      Nov 2006
      Location
      Mountain Springs, Texas
      Posts
      4,498
      Country Flag: United States
      You are going to need one of these on the pressure side to clear the pulley.

      http://www.jegs.com/i/Earl's/361/961...SABEgJbVvD_BwE

      Return side is just a hose barb on the reservoir.

      Don
      1969 Camaro - LSA 6L90E AME sub/IRS
      1957 Buick Estate Wagon
      1959 El Camino - Ironworks frame
      1956 Cameo - full C5 suspension/drivetrain
      1959 Apache Fleetside

    5. #5
      Join Date
      Nov 2011
      Posts
      25
      Country Flag: Norway

    6. #6
      Join Date
      Apr 2001
      Location
      The City of Fountains
      Posts
      15,977
      Country Flag: United States
      I would also inquire what sort of pressure and volume is needed for the Unisteer rack. Then contact TurnOne for the necessary parts. For the actual hoses, I suspect that a local industrial hydraulic hose maker can set you up. In the industrial world AN fittings are called JIC.



      Andrew
      1970 GTO Version 3.0
      1967 Cougar build
      GM High-Tech Performance feature
      My YouTube Channel Please Subscribe!
      Instagram @projectgattago
      Dr. EFI
      I deliver what EFI promises.
      Remote Holley EFI tuning.
      Please get in touch if I can be of service.

      "You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her






    Advertise on Pro-Touring.com