Results 1 to 2 of 2
Thread: 68 camaro ls3 swap
-
10-19-2017 #1
Registered User
- Join Date
- Oct 2017
- Posts
- 3
68 camaro ls3 swap
Hey Guys! just installed a ls3 "gm proformance" with t56 and I'm having a starter issue I bought a ACDELCO 12617229 cause I wanted the wheather prove connector and factory heat shield but its hitting bell housing can a guy die grind the housing to get it to fit and will it work right?? Thanks!!!
-
10-19-2017 #2
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 15,975
Presumably you are using a 4th gen f-body bellhousing? I am using that starter with that bellhousing and I just took a Dremel tool with a 80 grit flapper wheel and made a little extra room by grinding at the starter pocket inside the bellhousing.
Originally Posted by joes68
Andrew
1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @projectgattago
Dr. EFI
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
-
Reply With Quote
