Results 1 to 4 of 4
Thread: Transmission Tunnel Clearance
-
09-15-2017 #1
Registered User
- Join Date
- Oct 2011
- Posts
- 696
Transmission Tunnel Clearance
Hey guys, how much clearance should there be between transmission tunnel and transmission?
thanks
-
09-18-2017 #2
Registered User
- Join Date
- Feb 2016
- Location
- Lawrenceville, IL
- Posts
- 348
I typically recommend at a minimum 1/4"-3/8" that should keep it from hitting under torque load.
Originally Posted by joeko23
visit us on the web at www.bowlertransmissions.com
-
09-18-2017 #3
Registered User
- Join Date
- Oct 2014
- Location
- DFW, Texas
- Posts
- 422
I would like to add that it depends on your mounts. Poly mounts flex less, factory squishy rubber with lots of traction and a manual trans can flex substantially, a tied down engine with a torque strap will be limited and can have tighter clearance..
"it depends"1972 Plymouth 'Cuda - Not LS-swapped, 5.7L Hemi [MS3 Gold Box], T56 Magnum 6-speed - 'Cuda Build Page
1976 Dodge D100 - Warlock
2016 Subaru WRX - E30 Tune
-
09-18-2017 #4
Registered User
- Join Date
- Oct 2011
- Posts
- 696
Sounds good. Thanks!
-
Reply With Quote
