Quintin Brothers- Fesler 1968 Camaro SEMA 2017 BUILD

[rickpaw]

Those headers look flawless! I noticed one thing and wondered if you would comment. I always thought that the oxygen sensors needed to be between the 10 o'clock and 2 o'clock position on the headers due to moisture accumulation. I was wondering if there was reason for this positioning at the 6 o'clock? I am absolutely drooling over that frame, great work!

Looks like they did that for clearance reason. If you look at the picture of the header installed on the car, having the sensor at 10-2 o'clock position will most likely interfere with the engine block or frame.

However, with the sensor mounted on the downward angle of the header, chances of moisture accumulation will be minimal.

Awesome built. Love watching the progress on the car.

[QuintinBrothers]

Mark @Forgeline really helped us out with some AWESOME wheels for this beast! Forgeline DE3C wheels in transparent red with custom engraved center caps!























- - - Updated - - -

Take a look at what our guys can do! This car is really coming together now! Custom Apple IPad mount in car to control bluetooth climate control and audio! Paired with the Anvil Auto carbon Racepak Data Systems dash cluster and TMI seats! We can't wait reveal this Monster in the FESLER BUILT booth at SEMA 2017!!










Look at those SWEET Anvil Inner fenders! This one has the best of everything on it!

[QuintinBrothers]

Here is how the car looked as it left here and was on its way to the body shop! A lot of work is ahead!

[QuintinBrothers]

And as it arrived, The camaro is already feeling out of place next to all its foreign brothers and sisters!

[QuintinBrothers]

The guys didn't waste any time digging into this build!







Take a look at this sweet custom hood they are building! The head body guy, Garret Holler is taking charge and is creating a custom bulge at the front of the hood to clear the HI-Ram intake.

[QuintinBrothers]

The guys worked non-stop everyday to get these gaps PERFECT for SEMA!









- - - Updated - - -

[QuintinBrothers]

The guys all went crazy modifying the AUTO-RAD radiator close-out panel! There is no way that anyone could ever tell that it was modified.



This picture shows the custom bracing made to clear the Holley- HI-Ram intake.. The cowl was also cut and sliced up in the front, to clear the intake.









- - - Updated - - -

We have been having a VERY hard time dealing with trying to pick a color. The rendering was made on whatever Matt thought looked good, not a paint code. We have loved the color on the rendering.. all the way up until we got a few spray-outs. It just didn't POP like we wanted. We took four guys from the shop and went out color searching at different car dealerships. The color we decided on was not at ANY of the dealers.. Its surprising and wayy different than the rendering was done up like. Change of plans!

[ryeguy2006a]

Wow, your paint guys are moving very quickly!

[QuintinBrothers]

[QuintinBrothers]

The front and rear flush mounted windows were fitted and some modifications were made to make the windows fit better around the gaps, along with shaving the drip rails and smoothing some things over on this beast. This is going to be Soo nice when it is completed.



















- - - Updated - - -

The new color has been decided! This car will POP when it is completed. The blue is a huge change.. But we decided that for our first build, It has to be bright!

[QuintinBrothers]

Some of our radio and sound system parts arrived the other day! Everything is JL Audio!

[QuintinBrothers]

I am a little behind on updates.. Here is the car almost ready for some primer after all the custom work has been completed. :thumbsup:













- - - Updated - - -

The frame has been painted! The body men went to work on smoothing out all the welds, pits and imperfections they could find (There wasn't many as the frames are awesome from Roadster Shop)

[ryeguy2006a]

That frame is goregous! Nice work

[QuintinBrothers]

Wow, again... got busy and haven't found the time to update this lately. Updates coming soon as we are only 32 days away from when we have to leave for VEGAS!

[QuintinBrothers]

She is moving quickly to the finishing touches! All the freshly powder-coated parts are installed onto the beautiful Roadster Shop chassis!

[QuintinBrothers]

[QuintinBrothers]

We are a little behind.. But here she is with some guts in primer and ready for more blocking!

[QuintinBrothers]

Final Primer is layed on!

[QuintinBrothers]

Here she is with paint in the jambs!













Underside is just as nice as the roof!

[1968CamaroSS_Sam]

It is all looking great. Awesome workmanship!